User's Manual

Receiver unit
(Fig.1)
(Fig.2)
(Fig.3)
(Fig.4)
Pairing Method
Press the button one time in the receiver, to replay the current
sound
Hold the button for 5 seconds,the receiver will have “Ding-Ding”
sounds.then turn on the sensor until the receiver has “Ding”
means pairing between sensor and receiver is completed. It will
have another “Ding-Ding” to exit pairing status.


Wireless Motion Sensor Doorbell Instruction
32 Sounds Selectable
Item No.:I - 228P
The sensor can be mounted on wall or put on the table.
The chime can be put on table or put to the strap.
Installation
S
Power on the item
elect Sound
Plug in the receiver
Receiver uses 120V main power.
Sensor uses 3x1.5V AAA Batteries
Sounds electionS
There are 32 sounds selectable for user. The desired tune
can be selected by pressing the button inside the sensor .
Sensor Unit
(Sounds
)
e
d
i
s
nI tc
e
l
eS
ON
O
F
F
Sound Selection/Pairing Button
The desired sound can be
selected by pressing this
Button.(32 sounds)
Shunde Advante Electron LTD.
Wireless Door Chime
Installation Instructions
AC 120V