User's Manual

Transmitter unit
Receiver unit
(Fig.5)
(Fig.4)
Fig. 1
LED indicator
Push button
Use flat screw driver to
push the hole, to open
the cover.
Fixing Point
Fig. 3
12V 23A battery
Fig. 2
Sounds electionS
Replay(Pairing)
Press the button one time in the receiver, to replay the current
sound
Hold the button for 5 seconds,the receiver will have “Ding-Ding
sounds. then press the bell push until the receiver has “Ding”
means pairing between bell push and receiver is completed.it
will have another “Ding-Ding” to exit pairing status.
l
l
(Fig.
6
)
Wireless Battery Operated Doorbell Instruction
32 Sounds Selectable
Item No.:Q - 218P
The bell push can be mounted on door frame.
The chime can be put on table or put to the
strip.
Installation
Select Sound
There are 32 sounds selectable for user. The
desired tune can be selected by pressing the
button inside the bell push.
To change the battery
Remove the battery cover.
Bell Push uses 1x12V A23 Battery
Receiver uses 2x1.5V AA Batteries
Replay(Pairing)
(Reset or add extra bell push if necessary)
Fixing Point
LED Indicator
Speaker
LED indicator
Removable Battery Cover
(Requires 2x1. 5V AA Batteries)
Shunde Advante Electron LTD.
Wireless Door Chime
Installation Instructions