User Manual Wireless Remote Control with AC outlet Receiver JP8301-71L8, JP8302-71L8 JP8305-71L8, JP8310-71L8 -1-
Introduction Thank you for purchasing our products, this device is consist of receiver and wireless remote control, it is mainly used for light control. Specification Receiver: Model Input Power Output power Receive frequency: Receive sensitivity: Transmitter: Model Power Supply: Features: Transmit frequency: Transmit power: Transmission distance: Modulation: Key quantity: Function: JP8305-71L8 AC 120V/60Hz, 10A , 1200W Max. AC 120V/60Hz, 10A , 1200W Max. 433.
Transmitter unit: Figure 2 ON CR2032 DC 3V OFF (Model: JP8301-71L8) ON OFF Up/Down CR2032 DC 3V (Model: JP8302-71L8) ON OFF Timing CR2032 (Model: JP8310-71L8) -3- DC 3V
1. 2. 3. 4. 5. Plug the receiver into the AC 120V/60Hz power grid Connect the light load into the OUTPUT port of receiver. Install a CR2032 battery into the battery box of remote control. Press “I” key to turn on light load or press “O” key to turn off. Press “△” or “▽” key to control the brightness of light load. 6. Press “30m” , “1h” , “2h” or “4h” key to control the working time of light load. FCC Statement This device complies with Part 15 of the FCC Rules.
IC Statement This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference. Including interference that may cause undesired operation of the device.