User Manual Wireless CDS Sensors with AC outlet Receiver JP8312-71L8 -1-
Introduction Thank you for purchasing our products, this device is consist of receiver and wireless remote control, it is mainly used for light control. Specification Receiver: Model Input Power Output power Receive frequency: Receive sensitivity: Transmitter: Model Power Supply: Features: Transmit frequency: Transmit power: Transmission distance: Modulation: Key quantity: Function: JP8305-71L8 AC 120V/60Hz, 12A , 1440W Max. AC 120V/60Hz, 12A , 1440W Max. 433.
Transmitter unit: Figure 2 Profile picture Positive image Negative image -3-
1. 2. 3. 4, Plug the receiver into the AC 120V/60Hz power grid Connect the light load into the OUTPUT port of receiver. Install a CR2032 battery into the battery box of remote control. Turn on the light/turn off the lights/open the window FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
IC Statement This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference. Including interference that may cause undesired operation of the device.
