User Manual Wireless CDS Sensors with AC outlet Receiver JP8311-71L8 -1-
Introduction Thank you for purchasing our products, this device is consist of receiver and wireless remote control, it is mainly used for light control. Specification Receiver: Model Input Power Output power Receive frequency: Receive sensitivity: Transmitter: Model Power Supply: Features: Transmit frequency: Transmit power: Transmission distance: Modulation: Key quantity: Function: JP8305-71L8 AC 120V/60Hz, 12A , 1440W Max. AC 120V/60Hz, 12A , 1440W Max. 433.
Transmitter unit: Figure 2 Positive image Negative image -3-
1. Plug the receiver into the AC 120V/60Hz power grid 2. Connect the light load into the OUTPUT port of receiver. 3. Install a CR2032 battery into the battery box of remote control. 4, With functions of light sense of timing FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
IC Statement This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference. Including interference that may cause undesired operation of the device.