User's Manual

User Manual
Model: B0129
Product Description
The B0129 RF Transceiver Module is a compact surface-mounted module for multi- channel RoLa
operation in the 2400 MHz ISM band. The module is completely shielded and pre-certied for
operation under US radio regulations for license-free use.
Technical data
Block Diagram
Theory of Operation/Technical Description
- RF circuit function:
The major part of this IC is a 2401-2478 MHz compliant
transceiver.
- RF signal ow:
The Control signal is encoded into a Data Stream to be the
modulation input for the transceiver.
-Description of Antenna system:
The antenna shall be connected to the RF pin. The RF pin is
matched to 50 Ohm. If the antenna connector is placed
away from the module at the motherboard, the track
between the RF pin and the connector should be a 50 Ohm
transmission line.
RF
Tranceiver
CC1200
Filter
1.8-3.7 V
SI
SCLK
SO
RESET
GPIO
CSN
GND
Pin Assignment
GND
ANT
GND
VCC
SI
SCLK
SO
RESET
GPIO
CSN
GND
The nal host product must be submitted to SHUN
HU Technology Co., Ltd. for conrmation that the
installation of the module into the host is in
compliance. with the regulations of FCC and IC
Canada. Specically, if an antenna other than the
model documented in the Filing is used, a Class 2
Permissive Change must be led with the FCC.
TCXO
52Mhz
Dimensions
Frequency
Modulation method
Channel bandwidth
Supply voltage
30.38×18.5×7.45(mm)
2.4GHz
RoLa
500KHz
Temperature range
-40°C+85°C
1.8-3.7 Volt
RN489896162JK915
FCC ID
RN489896162-B0129
FCC ID