Multi Profile Spot ORDERCODE 30645
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Multi Profile Spot brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec Multi Profile Spot™ Product Guide Warning..…...................................................................................…………………………………………… Safety-instructions………………………………………………………………………………………….…... Operating Determinations……………………………………………………………………………………… Rigging…………………………………………………………………………………………………………… 2 2 3 4 Description..…..............................................................................……….………………………………….. Features ………………………………...….……………………….……….………….………………….…...
WARNING CAUTION! Keep this device away from rain and moisture! Unplug mains lead before opening the housing! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
• • • • • • • • • • • • • • • • • • • Always hang the device with the color frame retaining clip in the locked position. Always allow free air space of at least 50 cm around the unit for ventilation. Always disconnect power from the mains, when device is not used, before cleaning or when replacing lamp! Only handle the power-cord by the plug. Never pull out the plug by tugging the power-cord. Make sure that the device is not exposed to extreme heat, moisture or dust.
Rigging Please follow the European and national guidelines concerning rigging, trussing and all other safety issues. Do not attempt the installation yourself ! Always let the installation be carried out by an authorized dealer ! Procedure: • • • • • If the Multi Profile Spot is lowered from the ceiling or high joists, professional trussing systems have to be used. Use a clamp to mount the Multi Profile Spot, with the mounting-bracket, to the trussing system.
Description of the device Features The Showtec Multi Profile Spot from Showtec is also suitable for Goboprojection. • 575W Lampe • 15000 Lumen bei 3265 ºK Overview Fig. 1 Fig.
Installation Installing the Lamp The Showtec Multi Profile Spot uses a HPL-575 Lamp (ordercode 80812O / 80812G / 80815G), as manufactured by all popular manufacturers. Use only the appropriate lamp for your unit. Note that, product versions that use other lamps, may be offered in the future. Check your product specification label for information. Always disconnect from electric mains power supply before changing lamps. The lamp has to be replaced when it is damaged or deformed due to the heat.
Lens Locations The different lenses used in the Moon Light are not interchangeable. When installing a new lens, refer to the illustration below for proper placement. Also, remember to have the lens' color designator dot facing the color frame. Fig. 5 Centering and adjusting the lamp The marked "A,B,C" three adjustive screws located on the rear lamp housing allow you to center the lamp within the reflector and adjust its beam field (See Figure 6 mark A. B. C.). 1.
Focusing the beam 1. Loosen the beam focus knob located under the barrel (Fig. 7). 2. Slide the lens tube forward or backward to achieve the desired beam edge. 3. Once the fixture is focused.tighten the beam focus knob. Fig. 7 Color frame retaining clip The color frame holder is equipped with a spring-loaded retaining clip thap prevents color frames and accessories from falling out (Fig. 8).
Shaping the beam You may shape the beam with the shutters, a pattern, an optional drop-in iris, or by rotating the barrel. Pattern Projection The pattern holder slot is on the top side of the barrel and in front of the shutters. It accommodates A-size, B-size and glass pattern holders (Fig.10). Fig. 10 Note: Because the Multi Profile S|pot is 3 inches wide, you can use A-size patterns for maximum pattern effectiveness. Use an optional donut in the accessory holder to enhance pattern projection.
Rotating the barrel assembly 1. Loosen the barrel rotation knob directly behind the shutters on the underside of the reflector housing (Fig. 12). Do not remove the barrel rotation knob. 2. Rotate the barrel to the desired position (up to 25º in either direction from the centered position). 3. Once the barrel is positioned, tighten the barrel’s rotation knob to lock it into position. Fig.
Adjusting the yoke position The device provides multi-positioning capabilities within its yoke for overall fixture height and angle. Setting the fixture height within the yoke The device has a two-position yoke for modifying the overall height in which the fixture is mounted (Fig 14). To change the height position, do the following: 1. Remove the yoke locking knobs, washers, and hex bolts from either side of the fixture. 2. Raise or lower the fixture to the desired position within the yoke. 3.
Cleaning 19°, 26°, 36°, and 50° glass lenses 1. Remove the beam focus knob at the bottom of the barrel. Remove the lens tube from the barrel. Note: It is not necessary to remove the lens for cleaning. If you do remove the 19°, 26°, or 50" lens, make sure the identifying paint dot is not removed during cleaning. 2. Dampen a clean lint-free cloth with vinegar or household ammonia. You may also use water, but it will leave spots that can be removed by gently polishing the lens with a clean and dry cloth. 3.
Maintenance The operator has to make sure that safety-relating and machine-technical installations are to be inspected by an expert after every four years in the course of an acceptance test. The operator has to make sure that safety-relating and machine-technical installations are to be inspected by a skilled person once a year. The following points have to be considered during the inspection: 1.
Product Specification Model: Showtec Multi Profile Spot Voltage : AC 230V-50Hz (CE) Power: max.
2005 Showtec.
