RGB Theatre Spot ORDERCODE 50463
Congratulations! You have bought a great, innovative product from Showtec. The Showtec RGB Theatre Spot brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec RGB Theatre Spot™ Product Guide Warning..…...................................................................................………………………………………….. Safety-instructions………………………………………………………………………………………….…. Operating Determinations……………………………………………………………………………………. 2 2 3 Description..…..............................................................................……….………………………………… Features and Overview ………………………………...….……………….………….………………….…. Backside…………………………………………………...…...….……………….…………………...….….
WARNING CAUTION! Keep this device away from rain and moisture! Unplug mains lead before opening the housing! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
• • • • • • • • • • • • • • • • • • • Avoid flames and do not put close to flammable liquids or gases. Always replace the lamp, when it is damaged or deformed due to the heat. Always keep case closed while operating. Always allow free air space of at least 50 cm around the unit for ventilation. Always disconnect power from the mains, when device is not used, before cleaning or when replacing lamp! Only handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.
Description of the device Features The Showtec RGB Theatre Spot is a Theatrelight from Showtec with RGB-Colormixing. • With use of DMX-Controller up to 16.000.000 Colors • 3 DMX-Channels, for every color one channel: R/G/B • MASTER- and DMX workmode NOTE: Knowledge of MIDI and DMX is required to fully utilize this unit Overview Fig.
Backside Fig.
Installation Installing the Lamp The Showtec RGB Theatre Spot uses 3x A1/244 500W Lamps (ordercode 80701P / 80701G), as manufactured by all popular manufacturers. Use only the appropriate lamp for your unit. Note that, product versions that use other lamps, may be offered in the future. Check your product specification label for information. Always disconnect from electric mains power supply before changing lamps. The lamp has to be replaced when it is damaged or deformed due to the heat.
MASTER-work mode 1. AUTO-Mode: Auto run program and built-in colors (40 Colors, see Master-Color Table). Parameter: d:XXX (000-100%): Color intensity, adjust output control. F:XXX (000-100): Fade-Time Parameter (0-60S). S:XXX (001-100): Run Speed Parameter (50mS/Step-60S/Step). 2. AUDIO-Mode: Music-controlled programs and built-in colors (40 Colors, see Master-Color Table) Parameter: d:XXX (000-100%): Color intensity, adjust output control. F:XXX (000-100): Fade-Time Parameter (0-60S).
DMX Channel Table The color and the intensity can be adjusted according to the next table: Note: 1. " N" denotes DMX value (0-255). For example: If the DMX value is 239, Red intensity is 50-(239-237)x6=38%, Green intensity is 25-(239-237)x6=13%, Blue intensity is100%. 2. "*" denotes unnameable color.
MASTER mode color table : (when d;XXX=d:XXX) NO. Red(%) Green(%) Blue(%) NO.
Replacing a Fuse Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the fuse burns out, the product will not function whatsoever. If this happens, follow the directions below to do so. 1. Unplug the unit from electric power source. 2. Insert a flat-head screwdriver into a slot in the fuse cover. Gently pry up the fuse cover. The fuse will come out. 3. Remove the used fuse. If brown or unclear, it is burned out. 4.
Product Specification Model: Showtec RGB Theatre Spot Voltage: AC 230V-50Hz (CE) Cooling: Ventilator Fuse: 10A / 250V 5 x 20mm Dimensions: 320 x 285 x 245 mm (LxWxH) Weight: 6,5 kg Operation and Programming DMX-control via standard DMX-controller Audio trigger: built-in microphone Signal pin OUT : pin 1 earth, pin 2 (-), pin 3 (+) DMX Channels: 3 Signal input 3-pin XLR male Signal output 3-pin XLR female Lamp Allowed lamp models*: Philips A1/244 500W ordercode 80701P) GE A1/244 500W ordercode 80701G *: Ver
2005 Showtec.
