Use and Care Instructions

ManualsBrandsShow Home ManualsElectronicsShow Home App Candy Canes

There are 29 color patterns to choose from

White

Red

Blue

Green

Orange

Pink

Aqua

Gold

Fuchsia

Lawn green

Magenta

Cyan

Yellow

Purple

Cold white

Warm white

Spring

Summer

Autumn

Winter

Christmas day

Valentines' day

Independence day

Thanksgiving Day

St. Patrick's day

Halloween

Sun

Earth

Multi Color

Your Bluetooth will

connect the products

automatically.

Holiday Showhome

Series ProductsPhone Bluetooth

Smart device must be compatible

with Bluetooth 4.0 and above

Smartphone compatibility

· Android 4.3 or higher version,Supporting 4.0 Bluetooth.

· iOS 7.0 or higher version,

iPhone:4S,5,5S,6,6+,6S,6S+,SE,7,7+,8,8+,X.

· iPad:iPad3,ipadmini(1,2,3,4 series),

iPad Air(1,2 series),iPad Pro.

· iPod touch

There could be a delay of 10 seconds

before your phone fully sync’s with your App,

depending on what phone you use.

Important Safety Instructions Frequently Asked Questions

My App can't connect with my products / devices

Connectivity issues mainly occur because of a weak bluetooth

signal.Try these steps and see if they help the connection.

1.Shorten the distance between your phone and the product.

2.Turn off bluetooth functionality on your phone, and turn back

on again, Try recconnecting the App with device again.

3.If the Above two options fail, then try cutting the power supply,

take the plug out of the socket. Once clear for a few seconds

place the plug back in to the socket and turn the power back

on. Try recconnecting the App with device again.

App can connect with devices, but there are no product numbers

displaying on the App, or product numbers are visible, but App

cannot connect and control the products.

1.This could be because of a bad connection to the power supply.

Unplug and insert the plug into the socket again, and turn on the

power again.

2.If the present password is different between the products and

App, then reset the products ( to do this, cut the power supply

and plug into a socket, repeat this for 3 times quickly)

3.If the above options fail, then exit the App close it down

completely then turn the App back on again.

If the product numbers visible are more than the actual

products.

1.The App may likely be connecting with nearby products,

try setting a password for the products.

If products change their mode without being controlled.

This could be because of a nearby neighbor using the App, you

need to set a password for the products.

Important Safety Instructions

When using electrical products, basic precautions should always be

followed including the following:

Read and following all safety instrucions.

b) Do not use seasonal products outdoors unless marked suitable for indoor and

outdoor use. When products are used in outdoor applications, connect the product

to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a

qualified electrician for proper installation

c) This seasonal product is not intended for permanent installation or use.

d) Do not mount or place near gas or electric heaters, fireplace, candles or other

similar sources of heat.

e) Do not secure the wiring of the product with staples or nails, or place on sharp

hooks or nails.

f) Do not let lamps rest on the supply cord or on any wire.

g) Unplug the product when leaving the house, when retiring for the night, or if left

unattended.

h) This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and

electric shock it should not be played with or placed where small children can

reach it.

i) Do not use this product for other than its intended use.

j) Do not hang ornaments or other objects from cord, wire, or light string.

k) Do not close doors or windows on the product or extension cords as this may

damage the wire insulation.

l) Do not cover the product with cloth, paper or any material not part of the

product when in use.

m) This product employs overload protection (fuse). A blown fuse indicates and

overload orshort-circuit situation. If the fuse blows, unplug the product from the

outlet. Also unplug anyadditional strings or products that may be attached to the

product. Replace the fuse as per the user servicing instructions (follow product

marking for proper fuse rating) and check the product. If the replacement fuse

blows, a short-circuit may be present and the product should be discarded.

n) Read and follow all instructions that are on the product or provided with the

product.

Save these instructions.

Use and Care Instructions：

a) When the product is placed on a live tree, the tree should be well maintained and fresh. Do

not place on live trees in which the needles are brown or break off easily. Keep the tree

holder filled with water.

b) If the product is placed on a tree, the tree should be well secured and stable.

c) Before using or reusing, inspect product carefully. Discard any products that have cut,

damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose

connectors connections, and wires.

d) When storing the product, carefully remove the product from wherever it is placed, including

tree, branches, or bushes, to avoid any undue strain or stress on the product conductors,

connections, and wires

e) When not in use, store neatly in a cool, dry location protected from sunlight.

User Servicing Instructions：

Replace the fuse.

a) Grasp plug and remove from the receptacle or other outlet

device. Do not unplug by pulling o

b) Open fuse cover. Slide open fuse access cover on top of

attachment plug towards blades.

c) Remove fuse carefully.

d) Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse

(provided with product)

e) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.

f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should

not be removed. Discard product of the attachment plug is damaged.

If connecting to a lighting string that does not have a Wattage (W) rating｛found on the tag

within 6 inches of the plug｝calculate the wattage as follows: Multiply the current (A) which is

on the flag-type tag by 120.

For Example: Lighting string is rated 120V, 60Hz, 0.2 Amps. 0.2*120=24 Watts

Add the wattage of each light string together for a total of 216 Watts or less. (Do not exceed

216 Watts)

Important Safety Instructions

CAUTION

1. To reduce the risk of fire or electric shock, do not attempt to replace lamps or

modify string.

2. To reduce the risk of fire and electric shock: a) Do not install on trees having

needles leaves or branch coverings of metal or materials which look like metal,

and b) Do not mount or support strings in a manner that can cut or damage wire

insulation.

Model No.: SL 91A, SL 91A48, SL 91B, SL 91B48, SL92A, SL95

FEDERAL COMMUNICATIONS COMMUISSION

(FCC) STATEMENT

FCC Caution: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

Note:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. This device complies with

Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that

may cause undesired operation.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:-Reorient or

relocate the receiving antenna.-Increase the separation between the equipment

and receiver.-Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.-Consult the dealer or an experienced radio/TV

technician for help.

*RF warning for Mobile device:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

3 4 5 6 7

Light Shows

Timer Settings

Color Reference

ShowHome

Products

Product Mode

Sync all ShowHome

Products

Customise Specific

light elements of

your show.

Bluetooth

ALL

Steady

Twinkle

Sparkle

Instead

Halloween

Fade

Roll

Wave

Fireworks

Polar

Spring

Valentines

Christmas

Independence

Multi-Color

Halloween

Cold White

Green

Color rand

SHOW 1

SHOW 2

SHOW 3

DEVICES

1. Search "Holiday Showhome App" to

download the APP from:

3. Control your products with the below

5 main functions on your App.

2. You need to turn on the Bluetooth first,

and then open app.

Quick Start Guide

FCC ID: OXGSL92A