User Guide support.shotscope.
Contents Inside your box Setting up your Shot Scope H4 The Shot Scope App and Dashboard Before you play for the first time At the course Post-round Editing / Signing off Leaderboards / Medals Get the most out of your Shot Scope H4 Terms and Conditions Inside your box 01 02 07 08 11 18 19 21 22 23 Thank you for buying a Shot Scope H4. Before turning on the device, please read our full user guide to ensure the correct set up.
Setting up your Shot Scope H4 Step 1: Download and install the mobile app Shot Scope provides both an Android and iOS app, these can be downloaded onto any compatible mobile or tablet. To download or install the Shot Scope app, simply search for Shot Scope on either the App Store or the Google Play Store. Register To register an account, open the app and then click on the ‘Register’ button. Complete all sections and then press the ‘Continue’ button.
NEED H4 ONBOARDING SCREEN Step 2: Complete the tutorial on the app The first time you enter the Shot Scope app after registering, you will be taken through a tutorial showing you how to use the handheld and the app. During this process, you will choose the settings for your device and sync the handheld to ensure it has the latest firmware installed. You must complete this process before using the H4.
Step 4: Check course maps We suggest that you check the mapping status of any courses you intend to play 48 hours before your tee off time. This is to make sure the course is in the system and has been mapped. Most courses will be mapped and on the handheld, but there could be the occasional new course that isn’t on the system or your course may have an update pending. To view the list of mapped courses on the Shot Scope system, navigate to the ‘Courses’ section in the app.
Step 5: Searching for, subscribing and adding a course You can search our course database by entering the name of the course or using your location to find nearby courses. Either use the search bar or use the filter at the top right of screen to filter courses by proximity to your current location. To make sure you always have the most up to date course maps, subscribe to any course that you play a lot to get notifications when the course map has been updated.
Step 6: Syncing If you have any course maps that need to be uploaded to the device, or any updates that need to be transferred to the handheld you will see a red notification at the top of the Courses screen. If you wish to perform a sync then tap on the ‘Ready to Sync’ button at the top of the screen. On the resulting screen, you will see the list of courses that require a sync. Press the ‘Sync All’ button near the top of the screen to start the process.
The Shot Scope App and Dashboard Download or update your mobile app Please make sure you have the most up to date version of the iOS and Android app installed. To upload rounds you must use the mobile app. You can also view and edit your round on the Performance Dashboard (shown on right) which can be accessed via web browser on a computer or tablet. Shot Scope Mobile app A quick overview of your statistics. Set up your Shot Scope, update firmware, update courses and upload your rounds.
Before you play for the first time Step 1: Charging your Shot Scope H4 Your Shot Scope can be charged from any USB port or USB compliant wall charger. Please use the charger provided with the product. Hold the charger with the Shot Scope logo facing the sky, then apply some pressure to the lever and carefully place the 4 prongs into the back of the device. The handheld screen will change to show the charging screen. Additional chargers can be purchased at www.shotscope.
Step 2: Installing tags Your Shot Scope comes with 16 tags, each labelled with an initial to identify the club. It is best practice to match the appropriate tags with the corresponding club. For example, the D tag would screw into your driver. Tags must be inserted securely into the grip of the club you wish to track. Do this by rotating the tag clockwise whilst applying a slight downward force. There are 2 ‘spare’ tags marked X1 and X2, these should be used for clubs such as a 7 wood or an extra driver.
Step 3: Setting up My Bag My Bag is a feature on the Shot Scope dashboard and apps which allows you to create a database of all of the clubs you use and track their performance. To access My Bag on mobile it can be found in the ‘more’ section of the app on iOS and in the drop down menu on Android. To compliment the Shot Scope app we also a have an online web dashboard https://dashboard.shotscope.com. This webpage has more detailed performance statistics and is easier to assign your clubs to My Bag.
At the course Step 1: Getting ready to play To start a round, firstly switch on the device by pressing the top left button, then unlock the handheld by pressing the bottom left button. Once the handheld is unlocked, press the top right button next to the ‘tick’. This will confirm the selection of ‘Play’. We suggest that you start a round just prior to arriving at the first tee. A GPS fix which should take around 30 seconds, the first time you play this may take a bit longer.
Step 2: How to use H4 The Shot Scope H4 shows front, middle and back distances, hazards and lay up distances. H4 has shot tracking and performance statistics included. To track your game simply tap the Shot Scope tag on the end of your club against the device to record a shot. Tagging works best when tapped against the Shot Scope logo. Once your tag has been detected the club will show on the screen. We recommend tagging before you take a shot as part of your pre shot routine.
Step 3: Mode and course selection The game modes are interchangeable and allow you to get the most out of your H4 by offering flexibility between events. After you have selected to start a new round you will be asked to confirm what mode you wish to play the round in. You can choose between: GPS only, Pro mode and GPS + Track GPS + Track GPS + Track: Combines both GPS distances and shot tracking so you can analyse your game post-round.
Step 4: During Play Button Lock Main GPS Screen The diagram below explains F/M/B distances and how to access the menu and hazard / lay up screens. You can skip holes by pressing the bottom left and right buttons. These features are explained in the user guide. Menu Middle Distance Front Distance Scroll Left Access Lay up / Hazard Screen Tag ID Back Distance The button lock feature locks the buttons while in play to avoid pressing accidentally. The buttons will lock after 15 seconds of inactivity.
Step 4: During Play (cont) PinCollect PinCollect is a simple feature that allows you to get the most out of your statistics by collecting the position of the pin. When you reach a green, your device will automatically change to the PinCollect screen. This screen shows the numbers 1-3, which represent the number of putts taken on the hole. On the following screen a 0 or 4 putt can be recorded.
Step 4: During Play (cont) How to access hazards and lay up distances To view hazards for the hole, click the top right button beside the ‘!’ icon. This will take you to the hazards and lay up screen where you can access distances to bunkers, water hazards and lay up distances that are on that hole. The screen will show the first two distances but you can scroll through all hazards / lay ups on the hole by pressing the top right and bottom right buttons.
Step 4: During Play (cont) Ending a round How to access last shot in GPS mode When standing on the tee or beside your ball before hitting a shot, unlock the screen and press the menu button (top left) then press start (top right button). As you walk towards your ball, the number shown on the screen will increase. Should you wish, repeat this process every time you hit a shot. After playing the 18th hole you will automatically be asked if you want to end the round.
NEED SCREEN - SAYS SYNC TO BAND Post Round Step 1: Uploading your data When going to upload your round, first make sure that you have your handheld turned on and next to your mobile phone (ensure you have Bluetooth enabled on your phone settings). The next step is to log into your app and tap the ‘Connect’ button at the top of the screen. The screen will then change to show that a sync is waiting, tap on the sync button to start the round sync.
Editing / Signing Off All rounds that you upload need to be signed off before they are included in your stats. This process ensures that all of your data is completely accurate. Rounds that have not been signed off are identified by an orange scorecard icon on both your online dashboard and mobile app. To begin the ‘Sign Off’ process on the dashboard, click on the card of the round you wish to sign off and then select ‘Edit/Sign off’ found below the map.
Step 2: Select which tees you played from, several options are included on the drop down list. If the tees you played from aren’t present, click on the plus icon to create a new set. When creating a new set of tees make sure all the pars for each hole are correct before going forward. Step 3: Once you reach step 3, the edit button will be enabled. Click on this button to begin making edits to your round.
Compete against your friends in Leaderboards and unlock Medals When signing off your round you have the option to include the round in Leaderboards and Medals. You can compete and play against other Shot Scope users to gain medals and top our leaderboards. Opt into leaderboards via the ‘compete’ tab on the app and online dashboard.
Get the most out of your Shot Scope H4 Visit www.shotscope.
Shot Scope Technologies Ltd LIMITED WARRANTY & SAFETY INFORMATION FOR CONSUMERS PROTECTED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE. THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL RIGHTS CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. Shot Scope Technologies Ltd products are warranted to be free from defects in materials, components and workmanship through normal use.
SAFETY INFORMATION & HEALTH WARNINGS For your personal safety and to avoid damage to device follow safety information guidelines detailed below. Failure to avoid the following potentially hazardous situations could result in serious injury: •Always consult your Physician/Doctor before beginning or modifying any exercise program. If you have a pacemaker or other implanted electronics device, consult your Physician/Doctor before using any electronic devices from Shot Scope Technologies Ltd.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
To find out more information visit: www.support@shotscope.