User Guide support.shotscope.
Contents Inside your box Setting up your Shot Scope V3 Before you play for the first time At the course Post-round Editing / Signing off Leaderboards / Medals Get the most out of your Shot Scope V3 Terms and Conditions Inside your box 01 02 07 10 15 16 18 19 20 Thank you for buying a Shot Scope V3. Before turning on the device, please read our full user guide to ensure the correct set up.
Setting up your Shot Scope V3 Step 1: Download and install the mobile app Shot Scope provides both an Android and iOS app, these can be downloaded onto any compatible mobile or tablet. To download or install the Shot Scope app, simply search for Shot Scope on either the App Store or the Google Play Store. Register To register an account, open the app and then click on the ‘Register’ button. Complete all sections and then press the ‘Continue’ button.
Step 2: Complete the tutorial on the app The first time you enter the Shot Scope app after registering, you will be taken through a tutorial showing you how to use the watch and the app. During this process, you will choose the settings for your watch and sync the watch to ensure it has the latest firmware installed. You must complete this process before using the watch. Step 3: Connecting to Shot Scope If you have just completed the tutorial you won’t need to connect the watch again.
Step 4: Check course maps We suggest that you check the mapping status of any courses you intend to play 48 hours before your tee off time. This is to make sure the course is in the system and has been mapped. Most courses will be mapped and on the watch, but there could be the occasional new course that isn’t on the system or your course may have an update pending. To view the list of mapped courses on the Shot Scope system, navigate to the ‘Courses’ section in the app.
Step 5: Searching for, subscribing and adding a course You can search our course database by entering the name of the course or using your location to find nearby courses. Either use the search bar or use the filter at the top right of screen to filter courses by proximity to your current location. To make sure you always have the most up to date course maps, subscribe to any course that you play a lot to get notifications when the course map has been updated.
Step 6: Syncing If you have any course maps that need to be uploaded to the watch, or any updates that need to be transferred to the watch you, should see a red notification at the top of the courses screen. If you wish to perform a sync then tap on the ‘Ready to Sync’ button at the top of the screen. On the resulting screen, you will see the list of courses that require a sync. Press the ‘Sync All’ button near the top of the screen to start the process.
Before you play for the first time Step 1: Charging your Shot Scope V3 Your Shot Scope can be charged from any USB port or USB compliant wall charger. Please use the charger provided with the product. Hold the charger with the Shot Scope logo facing the sky, then apply some pressure to the lever and carefully place the 4 prongs into the back of the watch. The watch screen will change to show the charging screen if successfully done.
Step 2: Installing tags Your Shot Scope comes with 16 tags, each labelled with an initial to identify the club. It is best practice to match the appropriate tags with the corresponding club. For example, the D tag would screw into your driver. Tags must be inserted securely into the grip of the club you wish to track. Do this by rotating the tag clockwise whilst applying a slight downward force. There are 2 ‘spare’ tags marked X1 and X2, these should be used for clubs such as a 7 wood or an extra driver.
Step 3: Setting up My Bag The ‘My Bag’ feature can be found in the ‘Account’ tab within the ‘More/Settings’ section of the app. To compliment the Shot Scope app we also a have an online web dashboard https://dashboard.shotscope.com. This webpage has more detailed stats throughout it and has the same admin features like ‘My Bag’. You can log into this dashboard using the same email and password as your mobile app.
At the course Right-Handed Golfer? Left-Handed Golfer? Shot Scope will need to be worn on your left hand. Shot Scope will need to be worn on your right hand. Step 1: How to wear the watch In order to provide automatic shot detection, Shot Scope uses both the watch and the tags. The two must be within a 10cm range of each other at all times when a shot is being played.
Step 2: Getting ready to play To start a round, firstly switch on the watch by pressing the top left button, then unlock the watch by pressing the bottom left button. Once the watch is unlocked, press the top right button next to the ‘tick’. This will confirm the selection of ‘Play’. We suggest that you start a round just prior to arriving at the first tee. This means the watch won’t record data from the swings and putts during your warm up.
Step 3: Modes The game modes are interchangeable and allow you to get the most out of your V3 by offering flexibility between events. After you have selected to start a new round you will be asked to confirm what mode you wish to play the round in. You can choose between: GPS only, Pro mode and GPS + Track GPS GPS only: Provides F/M/B and hazard distances on the screen of your V3 throughout your round. This mode does not gather any shot tracking data.
Step 4: During Play PinCollect PinCollect is a simple feature that allows you to get the most out of your statistics by collecting the position of the pin. When you reach a green, your watch will automatically change to the PinCollect screen. This screen shows the numbers 1-3, which represent the number of putts taken on the hole. On the following screen a 0 or 4 putt can be recorded.
Step 4: During Play (cont) Ending a round How to access hazards To view hazards for the hole, click the top right button beside the ‘!’ icon. This will take you to the hazards screen where you can access distances to bunkers and water hazards that are on that hole. The screen will show the first two hazards but you can scroll through all hazards on the hole by pressing the top right and bottom right buttons.
Post Round Step 1: Uploading your data When going to upload your round data first make sure that you have Bluetooth switched on in your phone settings. The next step is to log into your app and tap the ‘Connect’ button at the top of the screen. The screen will then change to show that a sync is waiting, tap on the sync button to start the round sync. You will see a progress bar and when this has completed the round will be uploaded to your account.
Editing / Signing Off All rounds that you upload need to be signed off before they are included in your stats. This process ensures that all of your data is completely accurate. Rounds that have not been signed off are identified by an orange scorecard icon on both your online dashboard and mobile app. To begin the ‘Sign Off’ process on the dashboard, click on the card of the round you wish to sign off and then select ‘Edit/Sign off’ found below the map.
Step 2: Select which tees you played from, several options are included on the drop down list. If the tees you played from aren’t present, click on the plus icon to create a new set. When creating a new set of tees make sure all the pars for each hole are correct before going forward. Step 3: Once you reach step 3, the edit button will be enabled. Click on this button to begin making edits to your round.
Compete against your friends in Leaderboards and unlock Medals Compete and play against other Shot Scope users to gain medals and top our leaderboards. Opt into leaderboards via the ‘compete’ tab on the app and online dashboard.
Get the most out of your Shot Scope V3 Practice swings for optimum data To maximize data collection, it is vital that practice strokes are taken beside the ball. This allows for the refinement of the algorithm which detects shots. We recommend taking multiple practice strokes beside the ball for each shot to give the system maximum data to pull from. If you find that your V3 is not picking up shots, we recommend increasing your practice strokes and playing again. Visit www.shotscope.
Shot Scope Technologies Ltd LIMITED WARRANTY & SAFETY INFORMATION FOR CONSUMERS PROTECTED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE. THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL RIGHTS CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. Shot Scope Technologies Ltd products are warranted to be free from defects in materials, components and workmanship through normal use.
SAFETY INFORMATION & HEALTH WARNINGS For your personal safety and to avoid damage to device follow safety information guidelines detailed below. Failure to avoid the following potentially hazardous situations could result in serious injury: •Always consult your Physician/Doctor before beginning or modifying any exercise program. If you have a pacemaker or other implanted electronics device, consult your Physician/Doctor before using any electronic devices from Shot Scope Technologies Ltd.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
To find out more information visit: www.support@shotscope.