User's Manual

ManualsBrandsShinwa Industries ManualsElectronicsCar Kit Bluetooth Module

BT-MC88-1X 产品说明书

介绍 Introduction

1.1 简要 Overview

★

BT-MC88-1X是一款基于 CSR8811芯片设计的 HCI模组 .

BT-MC88-1X is a H CI module bas ed on CSR8811 ch ip.

★

BT-MC88-1X是由一单射频和基带 IC组成并应用于蓝牙 2.4GHz系统的模组 .

The BT-MC88-1X i s a module that Integrate a single-chip r adio and baseband IC for

Bluetooth 2.4G Hz systems.

1.2 特征 Features

★

蓝牙双模/蓝牙低功耗

Dual-mode Bluetoo th/Bluetooth low energy

★

高品质蓝牙4.0

High qualit y Bluetooth v4.0

★

Class2蓝牙功率等级

Bluetooth powe r level： Class 2

★

高速串行通讯接口（最高到4Mbps）

High-speed UAR T port (up to 4Mbp s)

★

PCM/I2S兼容数字音频接口

PCM/I2S digital audio inter faces.

★

支持IEEE 802.11协议

Support for IEEE 802.11

★

模组尺寸23*16*3.2mm，邮票孔，24个脚位（带屏蔽罩）

Module size 23 *16*3.2mm, Sta mp-24(with shi eld case)

★

模组内置PCB天线

Built-in pat tern antenna o n the module

★

标准的HCI通讯接口

Standard HC I support

★

宽电源供电，电压范围：2.7-3.6V

Flexible voltage supply, supp ly range: 2.7 -3.6V

★

环保RoHS

Environmental car e: RoHS

1.3 应用 Applications

★

车载免提

Hands-Free Car Kits

★

低端手机、功能手机、智能手机

Low-cost phones , Feature phone s, Smart-phone s

★

便携式媒体播放器

Portable media players

Summary of content (7 pages)

PAGE 1
BT-MC88-1X 产品说明书 1. 介绍 Introduction 1.1 1.2 1.3 简要 Overview ★ BT-MC88-1X是一款基于 CSR8811芯片设计的 HCI模组 . BT-MC88 -1X is a HC I mo dule based on CSR8 811 chip . ★ BT-MC88-1X是由一单射频和基带 IC组成并应用于蓝牙 2.4GHz 系统的模组 . The BT-MC88 -1X is a mo dule th at In tegrate a sing le -ch ip radio and baseband IC fo r Bluetoo th 2 .4GHz syste ms. 特征 Features ★ 蓝牙双模/蓝牙低功耗 Dual-mode Blue too th/Blue too th low energ y ★ 高品质蓝牙4.0 High qua lity Blueto oth v4.
PAGE 2
BT-MC88-1X Specification 2.规格参数 1 产品或项目名称 Product/ Project Name 车载蓝牙模组 Car kit Bluetooth Module 2 芯片类型 Chip set BlueCore CSR8811 A08 0.5mm WLCSP 3 产品射频功率等级 Power class level Class 2 (-6dBm < PAV < 4dBm) 4 波特率 Baud Rate 9600bps～4Mbps 5 额定电压 Rated Voltage 3.3V 6 工作电压范围 Operation Voltage range 2.7V～3.6V 7 工作范围 Operation Range 10 meters (33 feet) 8 尺寸 Dimension 23*16*3.2mm （L*W*H） 9 核心规格版本 Core Specification Version 10 认证 Test of certification FCC\CE\IC\MIC\BQB 11 工作温度范围 Operatio
PAGE 3
BT-MC88-1X Specification 4 管脚配置名称 Pin Name No.
PAGE 4
BT-MC88-1X Specification 5 模组尺寸 Module Dimension 模块尺寸 23*16*3.2mm(长*宽*高) 公差: ±0.1mm Module Size：23*16*3.2mm (L*W*H) tolerance: ±0.1mm 6 试验规格 Routine Test Specification 序号测试项目测试条件 No. Test Item Conditions 1 2 3 高温存储换 High Temperature (Storage) 在+85℃环境下放置 48 小时，在标准测试条件下三小时内进行测试，模块应满足可靠性测试标准 +85℃, 48hrs, In standard test condition take measurements within 3 hours.
PAGE 5
BT-MC88-1X Specification Tstg Max 85℃ 20 mins, Temperature shift time: within 5 mins. Tstg Min -40℃ 20 mins. 50 cycles 6 静电测试人体接触放电 ±2KV，3 次，静电测试后，在标准测条件下，模块应满足基本功能 Electrostatic Resistance human body model ±2KV, 3 times 振动测试振动频率：10～55Hz，扫频速率：0.1 oct/min，最大加速度：4G。X ，Y，Z 三个 Vibration Resistance 方向各两个小时，振动完成后，在标准测试条件下三个小时内测试，满足基本功能 7 Freq: 10~55Hz, 0.1 oct/min, max acceleration: 4Grms- Test time: X,Y, Z axis for 6 hours. After 1 hour vibration test, do the test in each direction.
PAGE 6
9. 附录 Appendix 9.1 FCC&IC 提示 FCC&IC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 7
following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.