User Manual

ManualsBrandsShintom ManualsElectronicsPCS handset

then press the 6 key three times for “o”.

Pressing the 0 key gives a space. The key changes between

uppercase and lowercase letters. To switch to numeric input

mode, press and hold down the key. Press the key once

quickly to insert smart punctuation, or press and hold the

key to choose from the whole range of symbols. To enter

symbols, press the 1 key once quickly. You can correct a

mistyped letter or number by using the CLEAR key to remove

it.

• Numeric - Numeric input mode.

• Symbols - Symbols input mode.

Press the / to select desired symbols, then press

appropriate number key.

Creating a Short Message (MENU 3-3)

Message can be created and sent.

1 Enter a text message, and press .

2 Enter the number directly or select the Phone Book using MENU,

display desired number, and press .

3 Select Save (the screen will ask you to send the message after

saving it), or select Send to send it without saving it.

NOTE:

- You can also create a text message using the Phone Book.

Refer to “Using T9 Predictive Text Input” on page 36.

Message Settings (MENU 3-4)

Storing Service Centre Number (MENU 3-4-1)

You need to store the phone number of the Short Message Service

Centre before sending messages.

Enter the phone number of the Service Centre in full international

format, and press .

Message Alert (MENU 3-4-2)

You can enable or disable the message alert.

To activate the message alert, select On.

8. Messages

CEL GDU325 (p.29-40) Eng.pm6 8/2/01, 10:17 AM37

Summary of content (9 pages)

PAGE 1
8. Messages then press the 6 key three times for “o”. Pressing the 0 key gives a space. The key changes between uppercase and lowercase letters. To switch to numeric input mode, press and hold down the key. Press the key once quickly to insert smart punctuation, or press and hold the key to choose from the whole range of symbols. To enter symbols, press the 1 key once quickly. You can correct a mistyped letter or number by using the CLEAR key to remove it. • • Numeric - Numeric input mode.
PAGE 2
8. Messages Message Lifetime (MENU 3-4-3) You can select one of 8 message lifetimes. You can select desired setting from: One hour, Two hours, Six hours, One day, Two days, One week, Four weeks, and Six months. Message Format (MENU 3-4-4) You can select the format or protocol ID of a message, if your service provider supports it. You can select desired setting from: Normal, Fax, Voicemail, ERMES, Nation’l paging, X. 400, and Internet. Initially, Normal will be selected.
PAGE 3
8. Messages Language Selection (MENU 3-6-2-1) This function sets the language for receiving various information services. Always set this service first before receiving an information service. NOTE: - When Insert or Add to end is selected, if no language has been set yet, “List empty” is displayed. Insert: You can use this submenu when no language has been set and you want to add a new language to the list of selected languages. 1 Press . 2 Select Insert, then press the .
PAGE 4
8. Messages Editing registered information 1 Select the service to be edited with 2 Select View/Edit, then press / , then press . . 3 The Subject code editing screen is displayed. Input the new code, then press . 4 The name editing screen is displayed. Input the new name, then press . For details on entering and editing service names, see “Keys” on page 46. Deleting registered information 1 Select the service to be deleted with 2 Select Delete, then press / , then press . .
PAGE 5
9. Call Diverting 9. Call Diverting (MENU 4) This feature allows your phone to divert (forward) incoming calls to a preset number. You can select Divert Call function setting for the following cases where such services are available: Press MENU and select Divert calls, and press . See page 18 for general information on the menu functions. Divert All Calls (MENU 4-1) 1 Select one of the following items, and press . On: Select to enable this feature.
PAGE 6
9. Call Diverting Divert when your phone is busy (MENU 4-2) 1 Follow steps 1 and 2 in section “Divert for All Calls (MENU 4-1)”. Divert when you do not answer (MENU 4-3) 1 Follow steps 1 and 2 in section “Divert for All Calls (MENU 4-1)”. Divert when your phone is out of range (MENU 4-4) 1 Follow steps 1 and 2 in section “Divert for All Calls (MENU 4-1)”. Cancel All (MENU 4-5) 1 Press . Then, all the divert settings will be cleared. 42 CEL GDU325 (p.41-59) Eng.
PAGE 7
10. Clock 10. Clock (MENU 5) Your phone provides clock and alarm functions. Press MENU and select Clock, and press . See page 21 for general information on the menu functions. Alarm Clock Settings (MENU 5-1) Once you have set the clock and date (refer to page 44), you can set an alarm clock in various ways. In addition to the normal alarm clock which will be activated by specifying the time and date, you can repeat the alarm at the selected interval.
PAGE 8
10. Clock NOTES: - Up to four different alarms can be set. Once four alarms have been set, the system will no longer go into alarm setting mode (MENU 5-1-1). - You can set multiple alarm clock settings. The settings are stored in your phone according to the time and date being set. - When you select Disabled in Alarm state, no alarm will be activated. - Please check the Date and the Time when you switch from Disabled to Enabled in the Alarm State.
PAGE 9
10. Clock Daylight Saving Adjustment (MENU 5-2-4) You can use the daylight saving feature which will move the current time forward by one hour. You can select desired setting from Off and On. The new setting will be displayed. NOTE: - When you disable this feature, the clock display will return to the normal setting. Time and Date Settings (MENU 5-3/5-4) Enter time/date, and press . Each time you press the dial key for an entry, the cursor scrolls for each digit.