PLL POCSAG NUMERIC DISPLAY PAGER Operating Manual Model:IWP-150M SHINIL INDUSTRIAL Co.
USER'S MANUAL FOR POCSAG NUMERIC PAGER 1. Self Test When user puts battery in the battery compartment, Pager starts self-test with alert tone and vibration. 2. Display Indicators - Message Protected: Message is saved. - Service area indicator: Antenna symbol indicates that the pager is within the service area. - Duplicated Message: If you receive a page that same page is already within your beeper, the duplicated message symbol will display.
Your Pager can receive up twenty numeric messages. When a message is received, your Pager alerts (vibration, audio, or chirp) for eight seconds. In the corner of screen, there will be a number. The number indicates how many numeric messages were received. a. Press any button to stop the alert. b. Press the Read button to display the numeric message. c. Press the Read button again to display the second screen of the message.
already in memory, the duplicated symbol is displayed to indicate that. The new duplicated message will be replaced the old duplicated message and the time stamp will also be replaced with the newer message as well. ⑧ Emergency Message If the caller needs to send an emergency page, the tone of the numeric message received will be different from the set alert. The caller must press 999 and then the numeric message in order to activate this option.
b. Press and release Read button until “MOTOR”is displayed. c. Press Mode button to activate your selection and return to the standby screen. ▶ Setting the silent Follow the vibrator alert-setting instructions to set pager silent. ▶ Setting the alert time User can set Pager how long it alerts when the message is coming. a. At the standby screen, press and release Mode button until "ALERT TIME”is displayed. b. Press and release Read button until your choice of 8-SEC, 12-SEC, or 4-SEC is displayed. c.
will be displayed. ▶ Press the Mode button and then “ERASED”is displayed. After 4 seconds, you will return the standby screen. He message selected will be completely erased. All remaining message Will be moved to the next available message slot. b. Erasing all message Follow the erasing individual message instructions and select “ERASE ALL” instead of “ERASE ONE” Press Mode button and“SURE”will be displayed. Press the Read button and “COMPLETED”will be displayed.
Press and release Mode button Then allow the pager to automatically return to the standby screen. 18. Automatic ON/OFF User can set Pager to turn on or turn off at a selected time of day. a. To enable automatic on/off Press and release the mode button“AUTO POWER”is displayed. Press Read button until “AUTO ON”is displayed with icon picture Press Mode button and then the hour digit flashes. Follow the time/date-setting instructions on page to set the on/off time.
FCC NOTICE NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications operate the equipment.