BLUEBELL USER MANUAL (VER1.00 2013.05.23) ANOUILH WN ~~ . Features . Specifications . Default Settings (Factory Settings) . Parts . LED Status . Product Component . Device Configuration . How to install .
BLUEBELL USER MANUAL 1. Features — Using Class 1{100m) Bluetooth Module, transmit power has been enhanced in the data communication. — The Devices are pairing in the factory stage. It can be used without any additional settings.
BLUEBELL USER MANUAL 3. Default Settings (Factory Settings) — Baud rate: 115200bps Parity: None — Flow control: Enable — Stop bits: One 4. Parts 1) Dongle type (> DAUBS Female or Male connector It connected to the serial port of Host or Slave Device. Used for data communication or configuration. 2 Status LED — Power/Link status/Data transceiver status displayed. (3 Mini USB Port — While connecting to POCONOS, It operates of virtual com port.
BLUEBELL USER MANUAL 5. LED Status some [I Status Description All LED blink three times Device boot OK Data LED on Transmitting / Receiving data Power LED on Power OK Link LED off No pairing established Link LED fast (0.1 sec) blinking Pairing (slave or master mode) Link LED fast (0.3 sec) blinking Discover able and wailing for connection (slave mode) Link LED slow (0.9 sec) blinking Inquiring (master mode) Link LED very slow (1.
BLUEBELL USER MANUAL Sam a 3) Optional peripherals Hem Specification Connected to mini USB port, used for Device settings, Data Communication/power supply Gender Connector For pippin serial port 7. Device Configuration 1) BLUEBELL Configuration Tool ann . (1) Make the Bluetooth device a connection ” — to POCONOS on which BLUEBELL . . Configuration Tool is installed. 2 Run BLUEBELL Configuration Tool, Select Serial port settings, and click PORT OPEN button.
BLUEBELL USER MANUAL 2) Hyper Terminal oo Tk hol Btn hae 1) Make a Bluetooth device connect to 5 POCONOS on which Hyper Terminal is installed. @ Run Hyper Terminal and open port with serial setting value of Bluetooth. AEE eel coe @ Press Enter Key after typing "AT', a Sisal hthboiceoni of reo Rte and it will show "OK" in the case of Normal connection. (On the other case, retry after change serial settings appropriately.) @ Change the Bluetooth device settings .
BLUEBELL USER MANUAL 2) Installing on the HOST device (such as PC/POS/ECR) STEP, Make the DAUBS female type Bluetooth a connection to Serial port of the HOST. if there is no serial port on HOST, connect by USB , then It operates of virtual com port, STEP, If there is no power supply from serial port, make the power adapter (+5V) a connection to the Mini USB port. 9. FCC compliance Information This device complies with Part 15 of the FCC Rules and Industry Canada License—exempt RSS standard(s).