Figure 3-60 Network and Dial-up Connections Figure 3-61 Network and Dial-up Connections Figure 3-62 Network and Dial-up Connections Figure 3-63 Network and Dial-up Connections 3-42
Figure 3-64 Network and Dial-up Connections Figure 3-65 Network and Dial-up Connections Figure 3-66 Network and Dial-up Connections Figure 3-67 Network and Dial-up Connections 3-43
Figure 3-68 Network and Dial-up Connections Figure 3-69 Network and Dial-up Connections Figure 3-70 Network and Dial-up Connections Figure 3-71 Network and Dial-up Connections 3.2.
l “Identification” Tab : (Figure 3-74) ü l Fill in or edit theTab: data(Figure as desired. “Network ID” 3-75) To have displayed youname start you youruse device, Enter thethis userinformation name, password, andwhen domain to log ü select “Display Owner Identification” at Power On. on to remote network. To set up identification for remote networks, see Setting up identification for remote networks. ü Figure 3-72 Owner Properties Figure 3-73 Owner Properties 3.2.
Figure 3-74 Password Properties 3.2.15 PC Connection Table 3-37 PC Connection ICON ITEM & FUNCTION l “PC Connection” Tab : (Figure 3-77) ü Select the first checkbox to enable direct connections to the ü ü ü desktop computer. (Figure 3-77) Tap the “Change Connection… ” button to modify the connection method from USB or Serial. (Figure 3-78) To exit the “Change Connection” dialog, press “OK” from the control bar, or press the key on the keypad.
Figure 3-75 PC Connection Figure 3-76 PC Connection 3.2.16 Power Table 3-38 Power ICON ITEM & FUNCTION l “Battery” Tab : (Figure 3-79) ü Provide change level indicators for Main battery and Backup battery. Provide remaining power capacity of main battery. If a “Main Batteries very Low” warning message shows, the remaining battery life is around 30 minutes to SC600 shuts ü ü ü down.
ü ü ü The Scheme Tab allows you to determine the time to switch state to Suspend mode when using either Battery Power or AC Power. Select Battery Power or AC Power as the power scheme from the pull-down list.( Figure 3-80) Select the time to suspend mode from the pull-down list.
Figure 3-79 Power Figure 3-80 Power Figure 3-81 Power 3.2.17 Regional Settings Table 3-39 Regional Settings ICON ITEM & FUNCTION l “Region” Tab : (Figure 3-84) ü Select the desired location/language. ü Review the Appearance samples in the bottom half of the screen. Select the Tab at the top for any settings you wish to change, ü Options to modify include Number, Currency, Time, and Date.
Figure 3-82 Regional Settings 3.2.18 Remove Programs Table 3-40 Remove Programs ICON ITEM & FUNCTION l “Remove Programs” Tab : ü Only user installed programs can be removed. Select the program you wish to remove from the list and press Ø “remove” button.