Draft V1.00 SWAN-2 Confidential ANTTM + Bluetooth ® Smart Module Bluetooth® 4.2 Low Energy SWAN-2 Data Report Please note that this manual should not be provided to end-users. SHIMANO INC.
Draft V1.00 SWAN-2 Control No. HD-AG-A140402 Confidential (1/6) Control name General Items Scope This specification (“Specification”) applies to the hybrid IC “SWAN-2”, a ANTTM+ Bluetooth® 4.2 Low Energy module (“Product”). . 1. Type: SWAN-2 2. Function: Radio frequency module. ANTTM+Bluetooth® standard Ver 4.2 Low Energy conformity 3. Application: Health & Fitness Equipment, Sensor, Cycle computer 4. Note: a.
Draft V1.00 SWAN-2 Control No. HD-AG-A140402 Confidential (2/6) Control name General Items c) Please notify certified ID by either one of the following method on your product. -Contains Transmitter module IC : 8117A-SWAN2 -Contains IC : 8117A-SWAN2 pecifiez ID certifiée dans votre produit par une de méthode suivante. -Contains Transmitter module IC : 8117A-SWAN2 -Contains IC : 8117A-SWAN2 Japan: Regulatory Information a) SWAN-2 is approved with the specific antenna on this module.
Draft V1.00 SWAN-2 Control No. HD-AG-A140402 Confidential (3/6) Control name General Items EU: Regulatory information a) Hereby, SHIMANO INC., declares that this SWAN-2 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Draft V1.00 SWAN-2 Control No. HD-AG-A140402 Nederlands [Dutch] Malti [Maltese] Magyar [Hungarian] Polski [Polish] Português [Portuguese] Român [Romanian] Slovensko [Slovenian] Slovensky [Slovak] Suomi [Finnish] Svenska [Swedish] Confidential (4/6) Control name General Items Hierbij verklaart [SHIMANO INC.] dat het toestel [SWAN-2] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, [SHIMANO INC.
Draft V1.00 SWAN-2 Control No. HD-AG-A140402 Confidential (5/6) Control name General Items Brazil: Regulatory information a) SWAN-2 is certified under below certification information: - ANATEL approval number: HHHH-AA-FFFF(TBD) *ID barcode in accordance with UCC/EAN-128 and ANATEL approval Number shown in above label format will be replaced after assignment accordingly.
Draft V1.00 SWAN-2 Control No. HD-AG-A140402 Confidential (6/6) Control name General Items Taiwan: Regulatory information a) SWAN-2 is certified under below certification information: Company name of Applicant: SHIMANO INC. NCC certification ID: CCXXxxYYyyyZzW(TBD) b) Any changes or modifications are not allowed. The product is subject to not cause harmful interference to radio communications and air flight safety.
Draft V1.00 SWAN-2 Confidential Control No. HD-AM-A140402 (1/1) Control name Absolute maximum ratings Absolute maximum ratings Symbol Parameter VCC_NRF Min. Max. Units -0.3 +3.6 V 0 V GND VIO -0.3 VCC_NRF+ 0.
Draft V1.00 SWAN-2 Confidential Control No. HD-AE-A140402 (1/1) Control name Electrical characteristics Electrical characteristics Recommendation operating range Symbol Parameter Supply voltage, normal mode VCC_NRF Supply voltage, normal mode, VCC_NRF DC/DC converter output voltage 1.9 V tR_VCC_NRF Supply rise time (0V to 1.8V) TA Operation temperature Min. 1.8 Typ. 3.0 Max. 3.6 Units V 2.1 3.0 3.
Draft V1.00 SWAN-2 Confidential Control No. HD-BA-A140402 (1/2) Control name Pin Layout Pin Descriptions Pin Pin name Pin function Ground Description 1 GND 2 P0.27 AIN1 XL1 General purpose I/O pin Digital I/O ADC input 1 Analog input Crystal connection for 32.768kHz crystal oscillator or Analog input external 32.768kHz crystal reference 3 P0.26 AIN0 XL2 Digital I/O General purpose I/O pin Analog input ADC input 0 Analog Crystal connection for 32.768kHz crystal oscillator output 4 P0.
Draft V1.00 SWAN-2 Confidential Control No. HD-BA-A140402 (2/2) Control name Pin Layout Pin Pin name 23 P0.00 AREF0 Pin Description function Digital I/O General purpose I/O pin Analog input ADC Reference voltage 24 DCC Power 25 P0.05 AIN6 Digital I/O General purpose I/O pin Analog input ADC input 6 26 P0.06 AIN7 AREF1 Digital I/O General purpose I/O pin Analog input ADC input 7 Analog input ADC Reference voltage 27 P0.