User's Manual

One Holland, Irvine, California 92618, U.S.A. Phone: [phone]
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: [phone]
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Please note: specifi cations are subject to change for improvement without notice. (English)
© Oct. 2013 by Shimano Inc. HTR
UM-7G90A-000-00
User's manual
Wireless Unit
User's manuals in other languages are available at :
http://si.shimano.com
IMPORTANT NOTICE
• Contact the place of purchase or a bicycle dealer for information on
installation and adjustment of the products which are not found in
the user's manual. A dealer's manual for professional and
experienced bicycle mechanics is available on our website (http://si.
shimano.com).
• Do not disassemble or alter this product.
For safety, be sure to read this user's manual
thoroughly before use, and follow them for
correct use.
Important Safety Information
Guidelines that require replacement, contact the place of purchase or a
bicycle dealer.
WARNING
• When the shifting switch is operated, the motor which drives the
rear derailleur will operate to the shifting position without stopping,
so be careful not to get your fi ngers caught.
• After reading the user's manual carefully, keep it in a safe place for
later reference.
Note
• This is a small waterproof connector. Do not repeat connecting and
disconnecting it. It may impair the function.
• The components are designed to be fully waterproofed to withstand
wet weather riding conditions; however, do not deliberately place
them into water.
• Do not clean the bicycle in a high-pressure car wash. If water gets
into any of the components, operating problems or rusting may
result.
• Handle the products carefully, and avoid subjecting them to any
strong shocks.
• Contact the place of purchase for updates of the product software.
The most up-to-date information is available on the Shimano
website.
• Do not use thinners or similar substances to clean the products. Such
substances may damage the surfaces.
• Be careful not to let water get into the terminal.
• Store in a safe place out of the reach of small children to avoid
letting them swallow by mistake.
• 2.4GHz digital wireless system
2.4GHz-frequency digital wireless technology, which is the same
technology used for wireless LAN.
However, in a very rare occasions, objects and places may generate
strong electromagnetic, waves and interference, which may result in
incorrect measurement.
*
Television, PC, radios, motors/engines, or in car and trains.
*
Railroad crossings and near railway tracks, around television
transmitting stations and radar bases.
*
Other wireless computers or digitally controlled light.
• Products are not guaranteed against natural wear and deterioration
from normal use and aging.
• For maximum performance we highly recommend Shimano lubricants
and maintenance products.
Regular inspections before riding the
bicycle
Before riding the bicycle, check the following items. If any problems are
found with the following items, contact the place of purchase or a
bicycle dealer.
• Is the wireless unit securely installed to the frame?
• Is there suffi cient charge remaining in the battery?
• Is there any noticeable damage to the electric wires?
Names of parts
Wireless unit
(SM-EWW01)
Electric wire
Battery
(SM-BTR1)
Functions
The wireless unit transmits the following three types of information to
compatible cycle computers or receivers.
1) Number of gears (front, rear)
2) Di2 battery level (External type: SM-BTR1, Built-in type: SM-BTR2)
3) Adjustment mode information
For information on which of the above types of information is to be
displayed, refer to the manual for your cycle computer or receiver.
How to conduct pairing
To conduct pairing, the cycle computer needs to be in pairing mode. For
information on how to put the cycle computer into pairing mode, refer
to the manual for the cycle computer.
1) Put the cycle computer into pairing mode.
2) When using an external battery
Check that the electric wires are connected to the wireless unit.
Then, remove and remount the external battery.
When using a built-in battery
Check that the electric wires are connected to the wireless unit.
Then, remove the electric wires (two wires) from the wireless unit
and reconnect them.
(Pairing communication is conducted for a few tens of seconds after
the battery is remounted or the electric wires are reconnected to the
wireless unit.)
3) This completes the pairing process.
Check on the cycle computer to see if pairing has succeeded.
For information on how to show the number of gears or the Di2 battery
level, refer to the manual for the cycle computer.