User's Manual

ManualsBrandsSHIMANO ManualsElectronicsWireless system SM-HR79

1. Features of the SC-7900

••••••••••••••••••••••••

2. Table of Optional Item Combinations

••••••••••••••

• Bracket combinations

•••••••••••••••••••••••••••

3. Product Overview

•••••••••••••••••••••••••••••

• Package contents

••••••••••••••••••••••••••••••

• Options

•••••••••••••••••••••••••••••••••••••

4. Replacing the Batteries

•••••••••••••••••••••••••

5. Pairing Function

•••••••••••••••••••••••••••••••

6. Installation

•••••••••••••••••••••••••••••••••••

7. Basic Operation

•••••••••••••••••••••••••••••••

• Power supply (ON)

•••••••••••••••••••••••••••••

• Sleep mode (power saving function)

•••••••••••••••••

• Restarting in initialization mode

•••••••••••••••••••

• Restarting from sleep mode

•••••••••••••••••••••••

• Backlight illumination

•••••••••••••••••••••••••••

8. Display Functions

•••••••••••••••••••••••••••••

• LCD display details

•••••••••••••••••••••••••••••

• Low battery / low memory indicator

•••••••••••••••••

• Normal mode details

•••••••••••••••••••••••••••

9. Setting Modes

••••••••••••••••••••••••••••••••

• Main menu

••••••••••••••••••••••••••••••••••

• SETTING mode

••••••••••••••••••••••••••••••••

Bike settings

••••••••••••••••••••••••••••••••

System settings

••••••••••••••••••••••••••••••

User settings

••••••••••••••••••••••••••••••••

Setting your heart rate zone

•••••••••••••••••••••

Setting the altitude

•••••••••••••••••••••••••••

Checking the pairing

••••••••••••••••••••••••••

• FILE VIEW mode

•••••••••••••••••••••••••••••••

Viewing files

••••••••••••••••••••••••••••••••

Deleting files

•••••••••••••••••••••••••••••••

Cycle Computer SC-7900

English

–

Dutch

–

100

German

101

–

148

French

149

–

196

Spanish

197

–

244

Italian

245

–

292

Japanese

293

–

340

English

INDEX

Summary of content (12 pages)

PAGE 1
Cycle Computer 1. Features of the SC-7900 •••••••••••••••••••••••• 2. Table of Optional Item Combinations • Bracket combinations 3. Product Overview SC-7900 •••••••••••••• ••••••••••••••••••••••••••• ••••••••••••••••••••••••••••• • Package contents • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Options • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4. Replacing the Batteries ••••••••••••••••••••••••• 6 7 7 English INDEX 8 8 9 11 5.
PAGE 2
Note: 10. Stopwatch Function / Recording Traveling Data 11.
PAGE 3
1. Features of the SC-7900 Display can switch to show a variety of traveling data. (Page 25) 2. Table of Optional Item Combinations Bracket combinations Traveling data such as distance, time, heart rate condition, calorie consumption, altitude and slope are displayed in the LCD of the main unit. SC-7900 Automated stopwatch counter (Page 40) The stopwatch counter can be started and stopped automatically by detecting the bicycle speed.
PAGE 4
Accessories 3. Product Overview • Magnet • Rubber belt for heart rate sensor unit Package contents Check that all of the following products are present.
PAGE 5
■ Bracket set for FLIGHT DECK 4. Replacing the Batteries SM-EW79F-E (for ST-7970) • Bracket Bracket band • Bracket band adapter For 25.8 mm inner diameter Insert so that the + side is facing upward as shown in the illustration, and then close the battery cap.
PAGE 6
■ Heart rate sensor unit Battery used: CR2032 (x1) Close Open The heart rate sensor unit will operate and battery power will be consumed if the electrodes are touched, even if it is not fitted to your body. In order to avoid battery power being consumed unnecessarily, remove the heart rate sensor unit and set the main unit to sleep mode immediately after use. In order for the main unit to display information from each of the sensors, the various units must first be registered with the SC-7900 system.
PAGE 7
(5) When pairing is complete, “™”wil appear beside the name of the unit which has just been paired. If you press the select button, the main unit will switch to pairing standby mode. You can then continue to carry out pairing operations for any other unit which has not yet been paired. * Do not press the set button (exit▼) until pairing has been completed for all units. (6) Repeat steps (3) and (4) for each unit until all units have been paired.
PAGE 8
■ Installing the speed sensor (4) Once the installation positions have been decided upon, securely tighten the speed sensor and the magnet. (1) Use a screwdriver to secure the accessory magnet (x1) to the right side of the front wheel as shown in the illustration. (2) Use two of the accessory cable ties to provisionally secure the speed sensor to the front fork as shown in the illustration.
PAGE 9
(3) Install the ST wireless unit as shown in the illustration, and then fit the top cover and secure it by tightening the screw. Tightening torque = 0.13 - 0.15 N·m {1.1 - 1.3 in.lbs} * The shape of the top cover to be installed is different for the ST-7900 and the ST-6700. 7. Basic Operation Power supply (ON) The power supply for each component is supplied by the following operations and actions.
PAGE 10
■ ST wireless units If there have been no button operations or gear shifting operations for 30 minutes or more, the ST wireless units will switch to sleep mode. (8) The startup screen will be displayed (for 3 seconds). Restarting in initialization mode If the language or the units have been changed, the main unit will start up in initialization mode. * The main unit will also start up in initialization mode when the power is turned on for the first time.
PAGE 11
Restarting from sleep mode (1) The startup screen will be displayed (for 3 seconds). 8. Display Functions LCD display details 7 1 (Display example) (2) The bike No. selection screen will be displayed (for 3 seconds). (3) If you press the select button while this screen is displayed, the bike number will flash and the bike number can then be changed. If you press the select button once more, the bike number will increase. • Bike No.: 1-4 (4) Press the set button to confirm the bike number selected.
PAGE 12
• When using in combination with the bracket set (SM-EW79F-E/I), the low battery indicator will not be displayed even when the battery level for the gear shifting system is low. • It is also not displayed during PC-LINK mode or while the pairing confirmation screen is being displayed. Normal mode details ■ Display Mode 1 Clock (CLK) Traveling distance (DST) For details on measurement of the traveling time, refer to page 42.