OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG ISTRUZIONI PER L’USO MANUAL DE INSTRUCCIONES TX-5090C/RDS AM/FM Stereo Digital Tuner Digital-Tuner für UKW Stereo, MW und LW Sintonizzatore Stereo Digital AM/FM Sintonizador AM/FM Estéreo Digital
Introduction ENGLISH UNPACKING AND INSTALLATION Congratulations on your purchase! Your new high fidelity Tuner is designed to deliver maximum enjoyment and years of trouble free service. Please take a few moments to read this manual thoroughly. It will explain the features and operation of your unit and help ensure a trouble free installation. Please unpack your unit carefully. We recommend that you save the carton and packing material.
Introduction READ THIS BEFORE OPERATING YOUR UNIT 120 V FOR OTHER COUNTRIES FOR YOUR SAFETY FOR YOUR SAFETY Units shipped to the U.S.A. and Canada are designed for operation on 120 V AC only. Units shipped to countries other than the above countries are equipped with an AC voltage selector switch on the rear panel. Refer to the following paragraph for the proper setting of this switch. Safety precaution with use of a polarized AC plug. However, some products may be supplied with a nonpolarized plug.
CONTENTS Introduction ENGLISH Introduction UNPACKING AND INSTALLATION READ THIS BEFORE OPERATING YOUR UNIT 2 3 Rear Panel Connections 5 Front Panel Controls 7 Operations LISTENING TO RADIO BROADCASTS LISTENING TO FM STEREO BROADCASTS PRESETTING RADIO STATIONS LISTENING TO PRESET STATIONS LISTENING TO RDS BROADCASTS (FM only) (Additional Function for TX-5090RDS Only) 9 9 10 11 12 Troubleshooting Guide 15 Specifications 16 4
Do not plug the AC input cord into the AC outlet when making connections. Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections . Refet to the connecting diagram in the operating instractions of AMPLIFIER/RECEIVER.
① OUTPUT JACKS Connect these jacks to the TUNER INPUT jacks of your amplifier such as AX-5090R, etc. ENGLISH ② AM LOOP ANTENNA TERMINALS The supplied antenna is for indoor use. Place it as far as possible from the main system, TV, speaker cords and AC input cord and set it to a direction for the best reception. ③ FM INDOOR ANTENNA The supplied antenna is for indoor use. Strech out the antenna fully and find the position for the best reception, then fix it.
⑨ ① ⑥ ① POWER SWITCH ⑤ ⑧ ⑦ ④ ③ ENGLISH Front Panel Controls ② ⑥ PRESET NUMERIC BUTTONS Press this switch to turn the power on and press again to turn the power off. For system operation, plug the AC input cord into the switched AC outlet on amplifier, keep the POWER switch ON and control power ON/OFF with the power operation on the amplifier. Use these buttons to memorize or recall the preset number of the desired station frequency.
ENGLISH FLUORESCENT DISPLAY RDS EON TP TA PTY ST TUNED TIMER VCR12 DVD TAPE 2M dB KHz MHz DTS DIGITAL Pro Logic TUNED INDICATOR STEREO INDICATOR RDS INDICATOR EON INDICATOR TP INDICATOR 3 Stereo THEATER HALL 12 PRESET MEM ms SLEEP TA INDICATOR PTY INDICATOR MEMORY INDICATOR PRESET NUMBER, SLEEP TIME DISPLAY FREQUENCY, OPERATING INFORMATIONS,etc.
Operations Auto tuning 1 2 Turn the power on. ENGLISH LISTENING TO RADIO BROADCASTS Select the desired band. Example) When selecting the FM band. MHz Each time the POWER switch is pressed, this unit is turned on or off. Each time the AM button is pressed, the band changes as follows; 3 Press the TUNING UP(▲) or DOWN(▼) button for more than 0.5 second. MW LW Manual tuning Manual tuning is useful when you already know the frequency of the desired station.
PRESETTING RADIO STATIONS ENGLISH You can store up to 30 preferred stations in the memory. 1 Tune in the desired station with auto or manual tuning. 2 Example)When memorizing FM broadcast of 91.9MHz in preset memory. Press the MEMORY button. ST TUNED ST TUNED MEM MHz MHz ”MEM” indicator flickers for 5 seconds. 3 Select the desired preset number. 4 Press the MEMORY button to memorize.
LISTENING TO PRESET STATIONS ENGLISH When using the PRESET NUMERIC buttons Press the preset number of the desired station. Example) When selecting “9” When selecting “12” within 2 sec. When using the PRESET SCAN button 1 2 Press this button to start scanning. At the desired station, press agin to stop scanning. ST TUNED ST TUNED MEM MHz MHz The unit starts scanning the preset stations in the preset sequence and each station is received for 5 seconds.
Additional Function for TX-5090RDS Only ENGLISH LISTENING TO RDS BROADCASTS(FM only) RDS(Radio Data System) is a method for sending information signals together with the transmitter signals.. Your tuner is capable of translating these signals and putting the information on the display. These codes contain the following informations. Program service name(PS), A list of Program Types(PTY), Traffic Announcement(TA), Clock Time(CT), Radio Text(RT).
PTY search 2 Use this function to automatically search and receive the stations broadcasting the desired program type. In the FM mode, select the PTY search mode. ENGLISH 1 While displaying “PTY SRCH”, select the desired program type. Each time this button is pressed, one of 17 different program types is selected as follows; Display NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M MOR LIGHT M CLASSICS OTHER M ALARM NONE "PTY SRCH" is displayed. 3 Start searching.
ENGLISH EON TA DISPLAY In the FM mode. Use this function to automatically search and receive the traffic announcement while listening to traffic program. In the TP mode. Each time this button is pressed, the display mode changes as follows; Traffic program is displayed and the TA indicator lights up. If the preset station broadcasting traffic announcement is found, it will be tuned in while listening to traffic program.
Troubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY No power The AC input cord is disconnected. The POWER switch is not pressed completely. Connect cord securely. Press the POWER switch to ON. Not receiving the stations No antenna is connected. The broadcast band is not set properly. The frequency of the desired station is not tuned in. Connect an antenna. Set the broadcast band properly. Tune in the frequency of the desired station.
Specifications ENGLISH FM TUNER SECTION Tuning frequency range......................................................................................................................................87.5~108 MHz Usable sensitivity, THD 3%, S/N 26 dB ......................................................................................................................15.2 dBf 46 dB quieting sensitivity, mono/stereo .................................................................................................
5707-04715-002-0