705i(G) cover_cover.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 2 Introduction ENGLISh READ THIS BEFORE OPERATING YOUR UNIT CAUTION This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 3 CONTENTS Introduction System Connections | 4 Front Panel Controls | 11 Remote Controls | | 2 ENGLISh • READ THIS BEFORE OPERATING YOUR UNIT 13 • REMOTE CONTROL OPERATION RANGE • LOADING BATTERIES | | 14 14 Operations • LISTENING TO A PROGRAM SOURCE • SURROUND SOUND | | 15 17 • ENJOYING SURROUND SOUND | 19 • LISTENING TO RADIO BROADCASTS | 24 • LISTENING TO RDS BROADCASTS(FM ONLY) | 26 (RDS Tuner(Regional Opti
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 4 ENGLISh System Connections • Please be certain that this unit is unplugged from the AC outlet before making any connections. • Since different components often have different terminal names, carefully read the operating instructions of the component connected. • Be sure to observe the color coding when connecting audio, video and speaker cords. • Make connections firmly and correctly.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 5 • The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected. • The jacks of VIDEO 2/VIDEO 3 can also be connected to an additional video component such as a cable TV tuner or satellite system. • Connect the jacks of VIDEO 3 to the video component in the same way.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 6 ENGLISh Continued ■hDmI (high Definition multimedia Interface) connection : (*) • You can connect the source component (DVD player, etc.) to the display component (TV, projector, etc.) through this receiver with using a commercially available HDMI cord. • The HDMI connection can carry uncompressed digital video signals and digital audio signals. • The HDMI video stream signals (video signals) are theoretically compatible with DVI-D.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 7 • The OPTICAL and the COAXIAL DIGITAL OUTs of the components that are connected to this unit can be connected to these DIGITAL INs. • A digital input should be connected to the components such as a CD player, DVD player, etc. capable of outputting DTS Digital Surround, Dolby Digital or PCM format digital signals, etc. • For details, refer to the operating instructions of the component connected.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 8 ENGLISh 7. CONNECTING SPEAkERS • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity(+ and -). If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection is incorrect, the sound will be unnatural and lack bass. • For installing the speakers, refer to "Speaker placement" on page 9.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 9 Continued ■Connecting speaker wire 2. Loosen by turning the speaker terminal counterclockwise. 3. Insert the bare part of the wire. 4. Tighten by turning it clockwise. ENGLISh 1. Strip away approx. 10 mm (3/8 inch) of wire insulation, then twist the wire ends tight. Speaker placement Ideal speaker placement varies depending on the size of your room and the wall coverings, etc.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 10 ENGLISh 8. CONNECTING ROOm 2 OUT JACkS OR ROOm 2 SPEAkER TERmINALS • ROOM 2 playback feature allows you to play a different program source in another room as well as one source in the main room at the same time. • For ROOM 2 playback, connect the ROOM 2 OUT jacks to the amplifier installed in another room, or connect the ROOM 2 speaker terminals to the speakers.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 11 Front Panel Controls 2 3 4 NETWORK AV RECEIVER 12 7 6 5 8 ENGLISh 1 RD-705i MASTER VOLUME STANDBY SOUND INPUT POWER ON / STANDBY ON AUTO / MANUAL STEREO SURROUND AUDIO VIDEO USB 5V / 1A OFF PHONES SETUP MIC F.AUX SPEAKER AUDIO ASSIGN ON / OFF RETURN TONE CH.LEVEL SETUP ENTER / MEMO TUNE PRESET BAND 22 23 VIDEO 4 VIDEO L AUDIO R MAIN MENU 9 10 11 13 14 15 16 17 18 19 20 1. POWER switch 2.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 12 ENGLISh ■SETUP mIC JACk • To use Auto Setup function, connect the supplied microphone to the SETUP MIC jack.(For details, refer to "When selecting the AUTO SETUP" on page 47.) ■Notes: • Because the microphone for Auto Setup is designed for use with this receiver, do not use a microphone other than the one supplied with this receiver. • After you have completed the auto setup procedure, disconnect the microphone.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 13 ENGLISh Remote Controls CURSOR CONTROL( , , , ), ENTER buttons ROOM 2 button NETWORK CONTROL (NETWORK, RATING ( ), PAUSE( ), PLAY( ), STOP( ), REPEAT( ), SHUFFLE( ), BACKWARD SKIP( ), FORWARD SKIP( )) buttons 13
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 14 ENGLISh REMOTE CONTROL OPERATION RANGE NETWORK AV RECEIVER RD-705i MASTER VOLUME STANDBY SOUND INPUT POWER ON / STANDBY ON AUTO / MANUAL SURROUND STEREO VIDEO AUDIO USB 5V / 1A OFF PHONES SETUP MIC F.AUX SPEAKER AUDIO ASSIGN ON / OFF RETURN TONE CH.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 15 Operations LISTENING TO A PROGRAM SOURCE Before operation • Each time the “VIDEO” button on the front panel is pressed, the input source changes as follows: → VIDEO 1 → V2/iPOD → VIDEO 3 → VIDEO 4 • Enter the standby mode. POWER • The STANDBY indicator lights up. This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 16 5. Operate the selected component for playback. Adjusting the tone (bass and treble) 9. Enter the tone mode. ENGLISh • When playing back the program sources with surround sound, refer to “ENJOYING SURROUND SOUND” on page 19. TONE 6. Adjust the (overall) volume. MASTER VOLUME • The tone mode is displayed for several seconds. DOWN - 30 TO N E : O F F FM 8 7 . 5 0 MH z P 0 1 10.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 17 SURROUND SOUND • This receiver incorporates a sophisticated Digital Signal Processor that allows you to create optimum sound quality and sound atmosphere in your personal Home Theater. ■DTS Digital Surround ■Dolby Digital Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Discs bearing the Dolby Digital logo includes the recording of up to 5.1 channels of digital signals.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 18 ■Classic This mode provides the acoustic effects of a large concert hall for classical music. ENGLISh • The following modes apply conventional 2-channel signals such as digital PCM or analog stereo signals to high performance Digital Signal Processor to recreate sound fields artificially. Select one of the 11 provided surround modes according to the program source you want to play.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 19 ENJOYING SURROUND SOUND ■Note: Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance. (For details, refer to "SETTING THE SPEAKER / ROOM EQ SETUP" on page 47.) AUTO/MANUAL • Each time this button is pressed, the mode changes as follows : Auto surround mode : The optimum surround mode will be ("AT" lights up.) automatically selected depending on the signal format being input.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 20 Continued ■To cancel the surround mode for stereo operation • Depending on the signal format which is being input, either the stereo mode or the 2CH downmix mode is selected. • To cancel either the stereo mode or the 2CH downmix mode, select the surround mode with using the SURROUND MODE UP/ DOWN (>/<) buttons.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 21 Continue • The volume level of each channel can be adjusted easily with the test tone function. ■Note : • When the SPEAKER button is set to off, the test tone function does not work. 1. Enter the test tone mode. ■Note : • In some Dolby Digital softwares, DRC setting may not be valid.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 22 ENGLISh Adjusting the current channel level • After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes. • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory ("CAL"), not into preset memory("REF 1", "REF 2"). 3. Adjust the level of the selected channel as 1. Press the CHANNEL LEVEL button.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 23 • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want. 1. Press the CHANNEL LEVEL button. 1. After performing the steps 1 ~ 4 in "Adjusting the CH.LEVEL current channel level" procedure on page 22, press the ENTER(/MEMORY) button. ENTER/MEMO • "CAL " (or "REF 1", etc.) is displayed for several seconds.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 24 LISTENING TO RADIO BROADCASTS ENGLISh Auto tuning manual tuning • Manual tuning is useful when you already know the frequency of the desired station. • After selecting the desired band, press the TUNING UP(+) / DOWN(-) buttons repeatedly until the right frequency has been reached. 1. Select the desired band. BAND TUNE AT - 26 AU T O S URR FM 8 7 .
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 25 manual presetting Tuning to preset stations • You can store up to 30 preferred stations in the memory. • After selecting the tuner as an input source, select the desired preset number. ENGLISh 1. Tune in the desired station with auto or manual tuning. PRESET 2. Press the ENTER(/MEMORY) button. ENTER/MEMO • When using the NUMERIC buttons on the remote control. Examples: For “3” : AT 26 AU T O S URR FM 8 9 .
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 26 RDS Tuner (Regional Option for some countries in Europe, etc.) ENGLISh LISTENING TO RDS BROADCASTS(FM ONLY) RDS(Radio Data System) is a method for sending information signals together with the transmitter signals. Your tuner is capable of translating these signals and putting the information on the display. These codes contain the following information. Program Service name (PS), A list of Program Types (PTY), Radio Text (RT).
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 27 Displaying RDS information ENGLISh In the FM mode, • Each time this button is pressed, the display mode changes as follows: → Surround mode → Radio Text (RT) Signal input ← Program → Service name (PS) Program Type (PTY) ← * Program Service Name(PS)-The name of the radio station. * Program Type(PTY)-This indicates the kind of program currently being broadcast. * Radio Text(RT)-Messages sent by the radio station.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 28 LISTENING TO INTERNET RADIO BROADCASTS, MUSIC FILES ENGLISh • You can listen to Internet radio broadcasts or music files stored on a USB memory device or a computer (media server). ■Internet Radio • Internet radio refers to radio broadcasts distributed over the internet. Internet radio stations from around the world can be tuned in by accessing Internet radio websites like Pandora, Reciva, Shoutcast and Aupeo.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 29 4. Select the desired item, then press the ENTER Basic Operation button. 1. Make the necessary preparations. ENTER/MEMO ENGLISh PRESET ① Check the network environment, then turn on this unit. (See “CONNECTING TO NETWORK” on page 10.) ② If settings are required, register your accounts and make the network settings, etc. (See “When selecting “settings”” on page 35.) ③ If the computer is used as a media server, prepare the computer.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 30 ◆To play repeatedly During playback of the desired music file, press the REPEAT( ) button. ) button. ENGLISh ◆To pause playback During playback, press the PAUSE( • Then “ ” lights up and the music files on the folder are played repeatedly. • To cancel the repeat playback, press this button again. • Then the playback will be stopped at the point where this button is pressed.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 31 When selecting “now playing” ENTER/MEMO Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired display mode. Example: When playing an Internet radio broadcast • Then a music broadcast is played. • When you select the Padora for the first time or the “Sign Out” on the Pandora menu, register your account first. (For details, see “Registering your account” on page 32.) AT Sho u t c a s t 1 Ra d i o Sw i n g 2.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 32 ◆When selecting “Create Station” • Then the name entry menu is displayed. ① While playing a song to be rated, press the RATING( ) button. AT ENGLISh Typ e ‘ so ng ’ o r ① Press the CURSOR UP(▲)/DOWN(▼) buttons to enter the desired character. • You can enter the desired among A~Z, a~z, 0~9, symbols (@, ., ----, blank). ② Press the CURSOR RIGHT(▶) button to move to next digit. • To delete a character, press the CURSOR LEFT(◀) button.
• While playing a broadcast, each time the CURSOR UP(▲) or DOWN(▼) button is pressed, the display mode changes as follows. → station name ↔ song title ↔ album name ← → Add to favorites*1/Reply*2 ↔ artist name ← *1 : Available only while playing a broadcast provided by Shoutcast. • For details on display mode, see “When selecting “now playing”” on page 31. *2 : Available only while playing a broadcast provided by Reciva or Aupeo. • When “Reply” is selected, perform the setting operations required.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:24 페이지 34 4. Repeat the above step 3 until the desired music 3. Press the CURSOR UP(▲)/DOWN(▼) buttons to file is selected. select the desired category, then press the ENTER button. Example: When playing a music file ENGLISh AT 4. Repeat the above step 3 until the desired music Lo ca l D r i v e 1 U SB file is selected.
When selecting “favorites” When selecting “settings” • You can listen to Internet radio stations (only provided by Shoutcast) or music files registered in the “favorites” list or delete them. ■Note : • When the USB memory device is disconnected or your computer (media server) is turned off, the music files stored on them cannot be played. • When listening to Internet radio broadcasts or music files for the first time, first make settings for accounts, playback, network, etc. for optimum performance. 1.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 36 3. Press the ENTER button. 5. Press the CURSOR UP(▲)/DOWN(▼) buttons to select “OK” or “CANCEL”, then press the ENTER button. ENGLISh • Then the previous status is returned to. 4. Visit the Reciva website at www.reciva.com on • When the “OK” is selected, the playback settings are stored and the previous status is returned to. • When the “CANCEL” is selected, the playback settings are not stored and the previous status is returned to.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 37 ■When selecting “General” * In case of selecting “AP List” • This unit searches for all available wireless routers. AT AP L i s t 1 l i n k s y s / N ONE 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to • Depending on whether security code is required or not while configuring network settings, “WEP”(“WPA”, “WPA2”, etc.) or “NONE” is displayed beside the name.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 38 ENGLISh RECORDING • The digital signals from the coaxial, optical digital input or HDMI IN can be heard but cannot be recorded. • When recording the analog signals from CD, AUX, F.AUX, VIDEO 2~4, be sure to select the analog input. (For details, refer to "When an input source other than TV, NET/USB, tuner is selected" on page 15.) • The volume and tone (bass, treble) settings have no effect on the recording signals.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 39 OTHER FUNCTIONS • The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off. • To set the receiver to automatically turn off after the specified period of time. • Each time this button is pressed, the sleep time changes as follows: → 10 → 20 → 30 → --- → 90 → OFF Unit : minutes • While operating the sleep timer, " " lights up.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 40 CONFIRMING THE HDMI FUNCTION ENGLISh To use the HDMI control functions properly, it is recommend to confirm the HDMI control functions usable with each connected component by performing the following operations. ■Note : • Some HDMI control functions may not work with certain components and TV that are not compatible with them. Before operation • Check that this receiver, TV and player, etc are connected by HDMI cabels.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 41 • The setup menu is displayed on the fluorescent display and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later. The setup menu consists of 7 main menus ; system, input, speaker/room EQ, CH level, multi room, parameter and HDMI. These menus are then divided up into various sub-menus.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 42 ■Setup menu flow • The setup menu flow is as follows : SYSTEM SETUP AMP : SURR.BACK / FRONT HEIGHT / ROOM 2 / BI AMP SW MODE : NORM / SW + TONE : OFF / ON ENGLISh RETURN BASS : 0 dB / - 10 ~ + 10 * : Default setting for AUDIO ASSIGN varies depending on the input source. TREBLE : 0 dB / - 10 ~ + 10 INPUT SETUP SPK / EQ SETUP VIDEO 1 CONFIG V2/iPOD CONFIG VIDEO 3 CONFIG VIDEO 4 CONFIG CD CONFIG AUX CONFIG F.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 43 SETTING THE SYSTEM SETUP AMP : SURR.BACK / FRONT HEIGHT / ROOM 2 / BI AMP SW MODE : NORM / SW + TONE : OFF / ON RETURN BASS : 0 dB / - 10 ~ + 10 TREBLE : 0 dB / - 10 ~ + 10 • AMP ASSIGN : To assign the power amplifier correctly depending on how to use the speakers. • SW(SUBWOOFER) MODE : To select the desired subwoofer mode. • TONE : To adjust the tone (bass and treble) as desired. • RETURN : To return to the previous menu. 1.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 44 When selecting the TONE ENGLISh OFF : To listen to a program source without the tone effect. ("DIR" lights up.) ↕ ON : To adjust the tone for your taste. ("DIR" goes off.) ■When the TONE is set to ON to adjust the tone (bass and treble) ① Press the ENTER button to enter the tone setting mode. ② Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired tone.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 45 INPUT SETUP VIDEO 1 CONFIG V2/iPOD CONFIG VIDEO 3 CONFIG VIDEO 4 CONFIG CD CONFIG AUX CONFIG F.AUX CONFIG RETURN A.MODE : AUTO / HDMI / DIGITAL / ANALOG D.IN : OPT1 / OPT 2 / COX 1 / COX 2 / - - AUTO : ON / OFF SYNC : 0 / 0 ~ 200 RETURN A.MODE : AUTO / HDMI / DIGITAL / ANALOG D.IN : OPT1 / OPT 2 / COX 1 / COX 2 / - - AUTO : ON / OFF SYNC : 0 / 0 ~ 200 RETURN A.MODE : AUTO / HDMI / DIGITAL / ANALOG D.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 46 When selecting the AUDIO mODE ENGLISh • You can select the audio input signal to be played. ■Notes : • Be sure to set the AUDIO MODE to the audio input which is connected and assigned to the selected input source. • When the HDMI AUDIO OUT is set to THROUGH, no sound will be heard from the speakers connected to this receiver (except ROOM 2 speakers). (For details, refer to “When selecting the HDMI AUDIO OUT” on page 58.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 47 • After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout. • Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the speaker settings, too.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 48 Continued ENGLISh 1. Place the microphone on a flat level surface at the listening position. • If possible, use a tripod, etc. to attach the microphone at the same height as your ears would be when you are seated in your listening position. • Ensure there are no obstacles between the speakers and the microphone. 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “AUTO SETUP”, then press the ENTER button.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 49 • The room EQ is a kind of room equalizer for your speakers. According to the acoustic characteristics of your room measured by the auto setup, the room EQ automatically adjusts the frequency response of your speakers. • If you use different brands or sizes of speakers for some channels or have a room with unique acoustic characteristics, such as walls, furniture, and the dimensions or the shape of the room, we recommend using the room EQ.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 50 When selecting the SPEAkER CONFIGURATION ENGLISh 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the "SPK CONFIG", then press the ENTER button. AT 30 S P K CON F I G F RON T : L A RGE 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired speaker. 3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to set the selected speaker as desired. • Depending on your speaker type, you can select one of these following speaker types.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 51 • When speakers are set to "SMALL", be sure to set their crossover frequency correctly according to their frequency characteristics. ■Note : • Even though performing the AUTO SETUP procedure, you should set the CROSSOVER manually when speakers are set to “SMALL”. 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the "CROSSOVER", then press the ENTER button. AT CR OS S O V E R Fc : 80 30 2.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 52 When selecting the SPEAkER DISTANCE 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “SPK DISTANCE”, then press the ENTER ENGLISh button. AT SPK D I S T AN C E 3 0 U N I T : M E T ERS 2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item. ■Note : • You cannot select the speakers set to "NO". 3. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 53 SETTING THE CH LEVEL SETUP CH LVL SETUP MODE : CAL / REF 1 / REF 2 LEFT : 0 dB / -15 ~ + 15 ENGLISh CENTER : 0 dB / -15 ~ + 15 RIGHT : 0 dB / -15 ~ + 15 SURR R: 0 dB / -15 ~ + 15 SBACK R : 0 dB / -15 ~ + 15 SBACK L : 0 dB / -15 ~ + 15 SURR L : 0 dB / -15 ~ + 15 SUBW : 0 dB / -15 ~ + 15 DD : 0 dB / -10 ~ 0 DTS : 0 dB / -10 ~ 0 RETURN ■Note : Depending on the speaker settings ("NO", etc), some channels cannot be selected.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 54 Recalling the memorized channel levels ENGLISh memorizing the adjusted channel levels • You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever you want. 1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the "MODE ~ ". 1. After performing the steps 1 ~ 3 in "Adjusting the current channel level" procedure on page 53, press the ENTER button.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 55 SETTING THE MULTI ROOM SETUP • The ROOM 2 function allows enjoying one source in the main room and playing another in a different room at the same time. ROOM 2 : OFF / ON RETURN IN : MAIN / TUNER / CD / AUX / F.AUX / VIDEO 1 / V2/iPOD / VIDEO 3 / VIDEO 4 VOL : 30 / MIN(0) ~ MAX(80) RETURN • ROOM 2(ROOM 2 MODE) : To turn on or off the ROOM 2 function. • IN(ROOM 2 INPUT) : To select the desired ROOM 2 source.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 56 SETTING THE PARAMETER SETUP ENGLISh PARAMTER SETUP PANORAMA : OFF / ON C.WIDTH : 3 / 0 ~ 7 DIMENSION : 0 / -3 ~ +3 DRC DD DRC : OFF / MID / MAX RETURN DRC THD DRC : AUTO / OFF / MID / MAX RETURN H.GAIN : LOW / MID / HIGH RETURN • DOLBY PRO LOGIC II MUSIC PARAMETERS : To adjust the various Dolby Pro Logic II/Dolby Pro Logic IIx Music (PANORAMA, C.WIDTH(CENTER WIDTH), parameters for optimum surround effect.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 57 When selecting “h.GAIN” • You can adjust the front height channel level as desired. ■Note: • This setting is valid only when listening in Dolby Pro Logic IIz mode. • This function compresses the dynamic range of previously specified parts of the Dolby Digital or Dolby TrueHD sound track (with extremely high volume) to minimize the difference in volume between the specified and nonspecified parts.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 58 SETTING THE HDMI SETUP HDMI SETUP HDMI : AMP / THROUGH ENGLISh CEC : OFF / ON POWER : OFF / ON RETURN • HDMI(HDMI AUDIO OUT) : To output the digital audio signals from the HDMI MONITOR OUT connector. • CEC(HDMI CONTROL) : To link operations with components connected to HDMI connectors and compatible with HDMI control. • POWER(POWER CONTROL) : To link the power ON/OFF status of this unit to components.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 59 • The power control function allows the power status of this unit to be interlocked with the power ON/OFF and start of playback of the connected components. OFF : Not to use the POWER CONTROL function. ↕ ON : To use the POWER CONTROL function. ■Note: • The POWER CONTROL can be set only when the HDMI CONTROL is set to ON.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 60 Troubleshooting Guide ENGLISh If a fault occurs, run through the table below before taking your receiver for repair. If the fault persists, attempt to solve it by switching the receiver off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the receiver yourself. This could void the warranty.
RD-705i(G)_ENG_101206_RD-705i(G)_ENG 2010-12-07 오전 10:25 페이지 61 ■AmPLIFIER SECTION • Power output, stereo mode, 6 Ω, THD 0.1 %, 40 Hz~20 kHz | 2× 80 W • Total harmonic distortion at -3 dB, 6 Ω, 1 kHz | 0.02% • Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω, 80 W | 0.
705i(G) cover_cover.
