User's Manual

Power/Lock key: Power ON/OFF when held about 3
seconds. Unlock Stand-by Mode.
Front Camera
Volume-/+Key: Decrease/Increase audio volume.
Micro SD card slot.
: 2MP camera on front of tablet.
Rear Camera: 2MP camera on back of tablet.
Micro USB Port: Connect to a computer via micro USB
cable for transfer data.
Earphone Jack
MIC Jack: Microphone.
Speaker: Dual Speakers.
1
2
4
3
Key Layout and Definitions
Introduction To Desktop
Slide to right
Slide to the right from the left
side for desktop screen program
in running.
Slide to left
Image slide applications
Slide to the left from the
right side of the screen to
start Charm menu column.
On Window 8.1 home screen, just click on the icon to
start the application. You may need to log on to your
Microsoft account before the application runs properly.
Introduction To Desktop
Introduction To App Interface
Slide with fingerSlide upward
In the start screen, slide upward
from the bottom of the screen to
visit all icon (APPs) interfaces.
In start screen, slide finger right
and left to move the image
Enlarge
1
2
If you want to fix more application programs on the start
interface, see the operation in the figure below, (1) lightly
touch, press and hold the application program magnet for
about one second and then let it go, and select (2) to fix to
the start screen.
Charm Menu Column
Slide to the left from the right side of the screen to start
Charm menu column, including: Start, Device, Setup,
Share, and Search Program.
Conversely, if you want to cancel or delete certain
application in the start screen, (1) lightly touch, press and
hold the application program magnet for about one second
and then let it go and run, and select (2) attribute column
to cancel the programs such as fixation and deletion and
then it can be completed.
1
2
Can let you search the files and application programs in the
Tablet PC.
Can let you share the program through social exchange website
or e-mail.
Can return to the start screen. From the start screen, you can also
use this function to return the application program that is opened
in the latest.
Can let you read, write and share files, connect external screen or
printer with the device connected to the Tablet PC.
Can let you set up the Table PC.
Search Menu
Device Menu
190mm
100mm
Quick Start Guide
Intel Tablet NBW7800 C
All view ID：
1
2
4
5
3
6
7
8
9
On the touch screen, narrow two
fingers to reduce the image.
On the touch screen, widen
two fingers to enlarge the image.
Share Menu
Set up Menu
Dual-Screen Application
On my computer in (Figure 1), slide it inward from the left
side of the screen, drag it and hold. Let go when seeing
double interfaces appear. In (Figure 2), press the partition
button on the middle partition line and drag right and left to
partition the display proportion of the double screens.
(Figure 1) (Figure 2)
Dormancy, restart and power off
Security Management
User and password setup
Method for quick setup:
Click the “Setup” button in “Charm” setup, and select “Change computer
setup”. Select “User” on the left and click “Create local account” in “Your
account” on the right side. After inputting the password of Complete
Windows Live Id Account, input username, password, confirm password
and password prompt.
Basic Operations
Thank you for your interest in our Nobis Android Tablets. We appreciate
your business and if you need to get help just reach out to
[e-mail]
Life-time tech support
Warranty
TO OBTAIN WARRANTY SERVICE
Bidwell Technologies Inc
Web site: www.bidwelltec.com
from 8:30AM to 5:00PM Monday through Friday Pacific Time.
Contact Nobis Technical Support
Reduce
MIC
MODEL: NBW7800 C
FCC ID:2AAP6M7859
INPUT: DC 5V/2A
MADE IN CHINA
5
7
6
9
8
Simply register your Nobis Tablet at www.bidwelltec.com. As long as you
own your Nobis Tablet we can provide you with Quick Set Up guides for
your tablet or answer a quick “How does this work again” call or email
to our Customer Service Department. However you MUST register
within 60 days of purchase.
Please note, Normal Product Warranty is separate and should be read
and understood as well.
FCC NOTICE
The following statement applies to all products that have received FCC approval.
Applicable products bear the FCC logo, and/or an FCC ID in the format FCC ID:
2AAP6M7859 on the product label. This device complies with part 15 of the FCC
Rules. Operation is subjected to the following two conditions: This device may
not cause harmful interference, and this device must accept any interference
received, including interference that may cause undesired operation. This device
has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. The
antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
RF EXPOSURE INFORMATION (FCC SAR)
DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO
RADIO WAVES. This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. The exposure standard
for wireless mobile devices employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR
are conducted using standard operating positions accepted by the FCC with the
device transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the device while operating can be well below the maximum
value. This is because the device is designed to operate at multiple power levels
so as to use only the poser required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power output. The
highest SAR value for the device as reported to the FCC when tested for use
when worn on the body, as described in this user guide, is W/kg. (Body-
worn measurements differ among device models, depending upon available
accessories and FCC requirements.) While there may be differences between
the SAR levels of various devices and at various positions, they all meet the
government requirement. The FCC has granted an Equipment Authorization for
this device with all reported SAR levels evaluated as in compliance with the FCC
RF exposure guidelines. SAR information on this device is on file with the FCC
and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid/
after searching on FCC ID: 2AAP6M7859
0.532
Compliance Information