MD30 Motorcycle Dash Cam Thank you for purchasing MD30 motorcycle camera. In order to better experience this product, please read this user manual carefully before using, and keep this manual well. Hope our product can meet your needs and we will serve you for a long time. ------------------------------------------------------------------------------------------------------------------------------ 1. Power Button/OK Button When the device is powered on, long press this button to turn on/off.
this button to switch the setting items. Please use a small screwdriver to loosen the screws and remove the cover, and insert the micro sd card into the card slot in the correct direction. It is recommended to use a high-speed memory card of class10, U3 or above. 1. Install the host Select the location you would like to install the host. Since the host support waterproof, it can be installed on the handle bar via using bracket.
tilt within a large degree for your convenience. Install the camera mounts via using the already placed adhesive, or using screws or zip ties to install these mounts. ❸Hidden the camera cable safely in the motorcycle and route it back to the main device location. Ensure the cables are not subjected to a pinch point or in an area that will expose it to high temperature from the engine. 3. Install GPS Module and remote control Locate a position to install GPS module that can expose it to the sky.
Keys Operation Instructions: ❶Capturing Photos/Lock Files: When the device is recording videos, short press this button to take snapshot, long press about 3 seconds to lock the file being recorded. ❷Switch Image Display/Switch to Dashboard Display: Short press this button to switch images display for the front and rear camera, long press about 3 seconds to switch to the dashboard display interface. ❸Screen Saver: Short press this button to turn on/off the screen.
How to view GPS track? ①View the GPS track through the application "RoadCam", open the "RoadCam" app on your phone, click "Album", select the video to playback, there is a GPS option to view in the below of screen. ② Download and install application "GXPlayer" on your computer, remove the Micro SD card, use a card reader to connect to the computer, then open the "GXPlayer" program to read GPS data. The device can be wirelessly connected to smartphone or tablet by following these steps.
"up" or "down" buttons to go over settings, click "OK" to choose. Use "up" and "down" buttons to chose your sub menu settings, click "OK" to save and exit: 1. Resolution: 2K(30fps)/1920*1080P(60fps)/1920*1080P(30fps) Choose the video resolution what you needs. It is recommended to choose 1920*1080P (60fps), that can record a smooth and clear images. 2. Loop Recording: OFF/1 minute/3 minutes/5 minutes/10 minutes Sets the length of your video files. By choosing OFF, the loop recording is disabled.
Set your power frequency based on your country. 14. Screen Saver: Off/1 Minute/3 Minutes Choose the time for screen saver to be activated. 15. Default Setting: Cancel/OK Erase all your changes to the setting and return the unit to the default factory settings. 16. Rear Lens Mirroring: On/Off Change mirror effect display for your rear camera. Select Off, the rear camera will display the same direction images; select on, the rear camera will display the reverse images. 17.
Voltage 5V / 2.0A GPS Support Wi-Fi Built in Micro SD card Support 8-256GB, class 10 above Image Stabilization Electronic Image Stabilization G-sensor Support Loop recording Support Microphone Built in the remote control Speaker Built in Battery Without Operating temperature 14 to 140 F Storage temperature 14 to 160 F Operating Voltage DC 12 / 24 V Size 110*61*20mm Weight About 175g Material ABS 1.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.