4k Full HD Lens Dash Camera Instruction Manual ZD46 1
Contents Important Notice………………………………………...3 Product Diagram…………………………….…………………3 Set up and Installation…..……………………..…………..5 Function Description…………………………………….…..6 Setting………………………………………………….…………..7 Specification……………………………………..
Important Notice 1. This product is intended for use in motor vehicle only. DO NOT install the camera where it might block the driver’s view of road (including the mirrors) or the deployment of the airbag. 2. Before using this camera, please format the memory card in the computer (select 32 KB unit size to format it), then insert the memory card first, and format the memory card in camera menu. 3.
1. Led Indicator 2.Port of holder 3. Screen 4. Mic USB port 5. Reset button (inside the hole) 6. Lens 7. Micro SD Card Slot 8. Power/Enter Button 9. Mode Button 10. Up Button 11. OK Button 12. Down Button Button Function Explanation Name Picture Function Explanation 1. Power on (press this button for 3S), Power off(press this button for 3S) 2. Short press Ok Button, confirm what you want to Power/OK choose Button 3. Recording video and photo, stop recording video.
again to start recording. 1. In standby, short press it to switch mode (photo mode, playback mode). When it is in playback mode, it Mode Button will automatically start recording after press M button. 2. During the recording process, short press M button to open/close microphone. 1. Short press it to choose file or menu option by Up Button rolling. 2. Short press it during the recording process, it will close WIFI function. 1.
1. Use the 3M holder sticker mount or suction cup mount to install the ZD65 dash cam on the windshield, recommended position is near the rearview mirror near the passenger seat, adjust both lens angle for best coverage. 2. Plug the included power adapter into the car cigarette lighter socket, the indicator will light up meaning power is on. 3. Connect the power adapter and the dash cam, and route the excess cable alongside the interior trim for better looking. 4.
the Power Button or connect the device to car charger. The Red Indicator on front of unit will illuminate and blink. The recording icon will change to red and blinking, it means the device is recording video normally. 2. Pressthe power button will stop recording. The Red Indicator on front of devicewill stop blinking. The Red icon “ ” will disappear, it means the device has stopped recording. 3. Pressthe power button again will start the device recording again. PhotoMode: 1.
Video: 1. Press the menu button to enter the Video settings menu. 2. Using the▼/▲ Buttons to select and highlight the function you would like to adjust. Press the menu button 3. Press menu button again to enter the subsequent menus. again to enter the System settings menu. 4. Press menu button Press the power button again to exit the menu interface. to enter or confirm the settings.
Options: On/Off Set to On or Off as desire. If set to Off, no sound will be record. Date Stamp Options: On/Off Set to On or Off as desire. If On is selected, the date and time will imprint and record on video. Exit Press the power button to Select OK to exit the setup menu System Settings: WIFI Options: On/Off Set or close WIFI. The method to connect WIFI you can check: Install and use WIFI Date/Time Set or reset the actual time and day.
Options: Off/1min/2mins/3mins/5mins/10mins GPS Options: On/Off This function GPS positioning, GPS track record, is a kind of live record.
Press to Select OK to exit the setup menu Photo Settings: Enter picture capture mode as instructed earlier. Press the Use the ▼/▲ buttons to select and highlight the function you would Button to enter the Picture settings menu. like to adjust. Press the Button to enter the subsequent menus. Press the Button toenter the System settings menu. Press the Button again to exit the menu interface. Press the Button to enter or confirm the settings.
Options: On/Off To turn the Anti-Shaking function on or off as desire. Date Stamp Options: Off/Date/Date&Time To set or reset off, date, date time, if date&time is selected, the date and time will imprint on the picture. Exit Press to Select OK to exit the setup menu Playback Mode: In the photo mode, short press the menu button to enter photo menu mode. Use the up/down button ▼/▲to select the function you would like to adjust.
Install and use WIFI: 1. Download APP “WITCAM” from App store and Google Play 2. Press to enter system to set up, choose WIFI and open WIFI, it will show SSID name and password in the led display, SSID name is NVT_CARDVcc8cdaa50ee 3. Open phone set up, and find SSID name (default password is 12345678),input password, and connect WIFI. 4.
1.3M, 1280 x 960 pixels VGA, 640 x 480 pixels Display Screen CPU Sensor 2.0inch color IPS HD display NTK96670 GC4653 Sensor Pixel 5.
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.