Instruction Manual

3
INSTRUCTIONS FOR USE
Charging the Bluetooth Speaker
For best results, fully charge the unit before use.
1. Plug the Micro USB end of the included USB charging cable into the charging port of the speaker.
Plug the other end into a USB port on your computer or USB power source with 1A output.
2. Charging Indicator turns RED while charging, and turns off when fully charged
Note: Before using the unit for the first time, please charge it for around 3-4 hours or until the Charging
Indicator turns off.
Turn On/Off the Speaker
Slide the ON/OFF SWITCH to ON position to turn on the unit with colour changing LED lights, or OFF
position to turn off the unit.
Pairing your device with the Speaker –
Your Bluetooth Speaker can stream wireless audio from any Bluetooth enabled device within the range
of up to 10m. Simply follow the below steps.
1. Turn ON the speaker.
2. Indication tone would be heard. The speaker is now in pairing mode.
3. Turn on the Bluetooth on your Mobile Phone or Tablet or Computer.
4. It will search for available Bluetooth devices.
5. Bluetooth Speaker would appear as “ZBT-098”, in the list of searched devices. Select it from the
available list of devices.
6. If required, enter the password ‘0000’ to confirm pairing.
7. Once paired successfully, another indication tone would be heard.
8. If you fail to pair it within a few seconds or you want to pair it with a new device, please repeat
above steps.
Play your favourite song on the Bluetooth source device and music would now stream through the
speaker.