ZP-THP60-Beta3H PRODUCT INFORMATION GUIDE 1
PRODUCT OVERVIEW 01. Adaptive design headband 02. Micro-USB charging&console cable 03. RCA to 3.5mm cable 04. Wireless Transmitter 05. Soft Ear cushion 06.
PRODUCT OVERVIEW 07. Micro USB Jack For Power/Audio* 1 08. 3.5mm In Jack 09. 3.5mm In jack 10. LED Indicator(Headphone) 11. Micro USB For Charing 12. Volume Down 13. Power Button 14. Volume Up 15. Mute/Pairing Button* 2 16. Pairing Button(Transmitter) * 3 17. LED Indicator(Transmitter) 18.
SETUP 1.Use the Micro-USB cable to connect Adapter and WirelessTransmitter to power up 2.Use the RCA to 3.5mm cable connect your TV(RCA output Jack) to Wireless Transmitter(3.5mm In) 3.You can also use 3.5mm to 3.
CHARGING 1.To charge the headphone connect the micro-USB cable to the Charging port on the headphone and plug the other end into Adapter 2.
POWER ON/OFF To power on the headset press and hold the power button for at least 3 seconds. The LED indicator will Red. To power off the headset press and hold the power button for at least 3 seconds. The LED indicator will off.
PAIRING The headset is already paired to the transmitter when it arrives. Press and hold the headphone& Wireless transmitter pairing button for 3 seconds, you will see the LED indicator blinking and Turn Red, the paring will be done.
OTHER CONNECT FOR WIRELESS AUDIO NOT INCLUDE 3.5mm TO 3.5mm CABLE NOT INCLUDE You can also use the 3.5mm to 3.
Connect To TV RCA/3.
Connect To SoundBar/Other Audio equipment SOUNDBAR OR OTHER AUDIO EQUIPMENT RCA/3.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
www.zfxtech.cn Copyright © 2007-2019 ZFX TECH.
