1. Special Note This product can directly click on the screen to select, and the bunion function corresponds fo the touch screen function. (Auto record when power on) The first boot may take about 5 seconds, please be patient. Touch screen operation should not be too fast, there will be a little delay 2. Introduction Thank you for purchasing our product, We hope that this user manual helps you get started with basic features that our camera has to offer.
4. Getting Started + Before installation, please check the accessories carefully to ensure that the product and accessories are correct and complete. + During installation, be sure not to insert the car key into the power supply, and do not insert or remove any machine accessories like micro SD card or rear camera when camera is powered on. These actions should be completed when power Is trued off. * When the car key is plugged into the vehicle, the camera will automatically tum on.
8. Product Overview Power Port « Forced Shutdown Left Sliding Black CAMERA) 3.
7.
8. Installation 1. Insert the micro SD card into the dash cam. Maximum support is 256GB. Please make sure the camera is turned OFF First. Then align the gold plated contacts facing towards the back of the camera {Screen Side). Then insert the memory card half way in. Then use the finger nail or a paper clip to push the card all the way inward until if clicks and locks in place.
4 Install the rear camera on the rear windshield using the adhesive taps or near the license plate using screws. f 1 Rear camera is designed fo record footage at the rear of the vehicle. ) it should not be used as aid in backing up. If you want to use the reversing function then connect the red trigger cable of rear camera extension cable to the positive lead of the car reversing lamp. This step is optional and only recommended for rear view mirror dash camera.
Resolution This setting flows you io set the video recording resolution. 4K +2K for dual camera recording. Loop Recording This selling allows you fo control! the duration of each individual loop clip. it will delete oldest files and record newer files over and over when the memory card is full Clips can be set to curative of 1 minute, 3 minutes, 5 minutes, or OFF. Dual Cam Display This setting slows you io control the display screen of each camera.can be set fo Front, Rear, or Front/Rear.
41. System Settings Screen Saver Tums the screen off after a set time of no activity to prevent driver distraction. The camera will continue recording and the screen can be woken up by pressing any button. Options 30 sec,1 minute, 3 minutes, or OFF. Time Display This option allows you to turn ON or OFF if you want the display screen of Clock. WiFi This features will allow you to tum WiFi broadcast from the camera so you can connect your phone with the dash camera fo access videos, photos and settings.
Time Zone You can also set the GMT time-one value so the camera will set the date and time based on the GMT value selection when it receives the GPS signal lock. Time zone will not change automatically when it starts / ends daylight saving time, please adjust manually at that time. GPS information The GPS signal will show if camera is receiving signal successfully.
13. App Introduction This camera use Road cam App, allows you to tum WiFi broadcast from the camera so you can connect your phone with the dash camera to access videos, photos and manage some camera settings. DOWNLOAD & SETUP 1. Search for “Road cam” on App Store, Google Play or by scanning the QR code below: abd the Store 2. Allow app permissions.
3. Standby mode Press MENU> On SAID and password 12345678 will appear on the camera screen; Turn on camera's WI-Fi by pressing the Menu > system Settings > WiFi > On SAID and password 12345678 will appear on the camera screen. ane ene BEERS Navigate to your smartphones WiFi settings and look for S810 network and enter the password 12345678 to connect. in the App Preview mode, press the cog {cb or settings icon on the fop right comer to enter if you want to make any changes with the camera setup. 12.
&. Tap on Video icon from the app home screen to access all recorded videos saved in the Micro 8D card. You can download, delete or even play videos from the app.
14. GPS Player Software Use the device comes with a player or visit sunning soft. competences him! & GPS Player for Windows (Windows, Windows, Windows) * GPS Player for Mac {Mac 10.11, Mac 10.11 above) Simply remove the memory card from the camera and insert it directly into the PC, then find and install PLAYER EXE With this plays you can play your videos on your computer screen with GPS information, driving route vehicle's sped, distance, position, data displays, and maps. 18.
. FAQ's Q: Video is fuzzy? A: Please make sure the lens of camera is clean and there Is no dirt on windshield also. A: Remove plastic screen protector on the lens and on the screen display. (See page 2) : Camera showing Memory Error A: Please ensure that the memory card is U3 high-speed card (8GB-256GB) and format before using. Ch: Menu button / buttons not working.
. Specifications Madam! $800 Processor Renovate 86670 Sensor Sony Frontiersman} Sony Front camera video resolution | 4K @ FPS Rear camera video resolution | 2K @ FPS Field of view Front 140°/ Rear 140° Video Code H.265 Audio Built-in microphone Screen size 3.99 inc Hips Connectivity WiFi WDR Built-in HDR Built-in App Road Cam Memory Micro SD up fo 256 GB Auto Turn On/Off Yes Holder Detachable stand Power supply Super capacitor Working temperature -10-80°C Dimensions 97x50230.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.