USER MANUAL L9 PRO MAX
INTRODUCTION Hello World Thank you for purchasing the Apollo Air. The electric scooter industry is still young and it takes forward-thinking customers like yourself to advance it. We hope you enjoy your new scooter as much as we loved developing it. Model: L9 PRO MAX FCC ID: 2AZ3Z-ZSF3151 This device complies with part 15 of the FCC Rules.
SPECS 4 Net Weight 17.6 kg Dimensions 116 x 53.5 x 114 cm Maximum Load 120 kg Minimum Load 20 kg User Height From 130 cm to 190 cm Maximum Grade % 10% Maximum Speed 20 km/h Range Up to 50 km depending on different factors including but not exclusive to: user's weight, road conditions, speed. Battery 21700 cell 36V15Ah ( 30 cells X 5000 mAh) Battery Type Lithium-ion Power Requirement AC110-240V / 50-60 HZ —— Input: AC 100-240V 50/60 HZ 2.0A —— Output: DC 42V 2.
ASSEMBLY Unfolding Attach handlebar 1 2 1 2 The first step is to unfold your electric doensure so,ensure Apollo scooter. Air. To doToso, the hook is not clipped into the rear foot rest. If it is, push down on the stem and unhook it from the rear foot rest. 1 3 4 Unfold the stem by pulling it to a vertical position. Ensure you do so until the stem is completely vertical. 2 Locate the folding latch and bring it up, locking the stem. The latch will require some force to lock fully upright.
TESTING Turn on the scooter by pressing on the power button located at the bottom of the display. To turn it on press the button from 2 to 3 seconds, until you hear a beep. 1 The speedometer, speed units, and the battery level should now be visibile on the display. Check that the gear change function is working properly by pressing shortly on the power button again. 2 A green "S" should now be visible on the display, a third press should make the "S" turn to red, changing to the top speed gear.
OPERATION WARNING: Incorrect assembly, maintenance, or use of your Apollo scooter can cause component or performance failure, loss of control, serious injury, or death. Even if you’re an experienced scooter rider, you must read and understand the entire manual and any documentation provided for subcomponents or accessories before riding.
How to brake It has two different types of brakes. The Apollo Air The regen brake which allows you to capture energy from braking and recharge your battery, and the drum brake. The regen brake will allow you to have a smoother and more efficient stop. To use it, simply release your thumb from the acceleration throttle. To control how smooth or abrupt your scooter comes to a stop log in to your Apollo App and adjust the brake preferences.
Handlebar features 1 Display 2 Accelerator throttle 3 Power button 4 E-brake throttle 1 2 DISPLAY WARNING: Incorrect assembly, maintenance, or use of your Apollo scooter can cause component or performance failure, loss of control, serious injury, or death. Even if you’re an experienced scooter rider, you must read and understand the entire manual and any documentation provided for subcomponents or accessories before riding.
BATTERY INFO SETTINGS App You can manage your settings through the scooter APP by BT The Apollo App is available for iOS and Android. To download it, visit our website - Apolloscooters.co - or look for it in your APP store as Apollo Scooters. You can also download it using the following QR code: * The settings you can control via the Apollo App may change with future App updates.
GENERAL SAFETY WARNING: Incorrect assembly, maintenance, or use of your Apollo scooter can cause component or performance failure, loss of control, serious injury, or death. Even if you’re an experienced scooter rider, you must read and understand the entire manual and any documentation provided for subcomponents or accessories before riding.
MAINTENANCE WARNING: Failure to properly maintain your Apollo scooter can cause component or performance failure, loss of control, serious injury, or death. A tune up consists of the following steps: t t t t t 20 Tire pressure check Bearing lubrication Suspension lubrication Brake adjustment Screw tightening The next maintenance step is to lubricate the bearings. Your bearings are the connection between the rotating wheels of your scooter and the non-rotating frame that holds them stable.
Drum Brake Adjustment 1 Note: this section describes a basic adjusment to your brakes. For an in-depth brake adjustment tutorial, please visit the help centre atapolloscooters.co/support . Use the included allen key to tighten the screws highlighted on the following graphics. Your brakes are an important component of your scooter. If you feel your brakes are not performing as well as they should, you might want to tighten your brakes. The first point of control of your brakes is your brake handle.
TROUBLESHOOTING WARNING: Incorrect assembly, maintenance, or use of your Apollo scooter can cause component or performance failure, loss of control, serious injury, or death. Even if you’re an experienced scooter rider, you must read and understand the entire manual and any documentation provided for subcomponents or accessories before riding. If you are not sure you have the experience, skills, and tools to correctly perform all assembly steps in the manual and the assembly video at apolloscooters.
E4 E5 E6 OVER CURRENT PROTECTION UNDER VOLTAGE PROTECTION OVER VOLTAGE PROTECTION If E4 error is reported continuously, it is considered to be hardware fault of controller. If E5 is reported continuously, check whether the battery voltage is too low (Below 30 Volts). If E6 is reported the battery voltage is too high. Solution: Replace the controller to test, if the error goes away the controller was the issue.
L9 PRO MAX 32 USA CANADA apolloscooters.co apolloscooters.
