Product Diagram

ManualsBrandsShenZhen YuYuanXin Electronic Technology ManualsElectronicsJOY-PAD (L) / (R)

说明书

Instructions

产品名称：Switch 蓝牙手柄

Product name: Switch Bluetooth Controller

产品编号：TNS-0163 版本：A1.1

Product No.: TNS-0163 Rev.: A1.1

1、产品简介:

1.Production Introduction:

支持蓝牙跟 Switch 主机连接；有功能键连发设定-Turbo 功能键、截屏键、陀螺仪重力感应、振

动、NFC 感应、手柄唤醒主机等功能；

It supports the connection between the Bluetooth and Switch console, and it is designed with

continuous firing settings in functions keys (Turbo function keys), screen shot key, gyroscope gravity

induction, vibration, NFC induction and console wake-up with controller, etc.

2、产品图解:

2. Product Diagram:

3、产品特点:

3. Product Features:

3.1、支持蓝牙跟 Switch 主机平台无线连接。

3.1 Support Bluetooth wireless connection with Switch host platform.

- key

Left 3D joystick

Bluetooth code key

TURBO key

Screens

hot key

Right

SR key

Left SL

key

+ key Y key X key

A key

B key

Right 3D joystick

TURBO key

Home

TYPE-C charging interface

Resetting key

ZL key

L key

Lock catch key

Left SR key

Left SL key

Lock catch

key

Resetting key

Bluetooth code key

ZR key

R key

Direction key

Summary of content (9 pages)

PAGE 1
说明书 Instructions 产品名称：Switch 蓝牙手柄 Product name: Switch Bluetooth Controller 产品编号：TNS-0163 版本：A1.1 Product No.: TNS-0163 Rev.: A1.1 1、产品简介: 1.
PAGE 2
3.2、设计有 Turbo 设置功能、可改变 Turbo 速率，有截屏键、陀螺仪重力感应等功能。 3.2 It is designed with Turbo setting function, variable Turbo rate, screen shot key and gyroscope gravity induction and other functions. 3.3、具有双振子振动功能。 3.3 It is designed with vibration function of double vibrators. 3.4、支持 NFC 感应。 3.4 Support NFC sensing. 3.5、支持主机唤醒功能、对码键连接。 3.5 It supports console awakening function and connection of the code matching key. 3.6、充电指示灯。 3.6 Provide the charging lamp.
PAGE 3
L3 键（左 3D 摇杆下压按键功能）有 L3 key (left 3D joystick press function) Yes R3 键（右 3D 摇杆下压按键功能）有 R3 key (right 3D joystick press function) Yes 充电指示灯有 Charging lamps Yes 振动功能有 Vibration function Yes NFC 读取功能支持 NFC reading function Support 手柄升级支持 Controller upgrade Support 5、模式与配对连接说明: 5 Mode and Pairing Connection Instructions: 5.1、Switch 无线连接模式： 5.
PAGE 4
console paired previously; if the back connection is not successful within 8 seconds, it will enter into the auto sleep status. ③在主机和手柄休眠时，按 HOME 键可唤醒主机，如果没有唤醒成功，可再次按下 HOME 按键唤醒主机和手柄。 ③Press the HOME key to wake up the console when the console and controller are in dormant state; if not successful, you can press the HOME key again to wake up the console and controller. 6、NFC 功能： 6 NFC Function: 6.1、因 NFC 感应区在右手柄 3D 处，读卡时需将 NFC 卡贴在右手柄 3D 帽正上方，读取时间 5-8 秒。 6.
PAGE 5
9 Low Battery Warming: 9.1、电池低电量报警：当前连接通道 LED 指示灯快速闪烁。 9.1 Low battery warming: The LED lamp of the current connection channel flashes quickly. 备注：当主机提示低电时手柄 LED 指示灯也会快速闪烁几下，不会一直持续闪烁 Remarks: When the host indicates low power, LED lamp of the controller will flash a few times quickly instead of continuous flashing. 10、Turbo 功能（连发快打设置）： 10 Turbo Function (burst setting): 10.1、半自动 TURBO 功能设置：按住 TURBO 键,再按需要设置为 TURBO 功能键的按键，就能轻松设置成功。 10.
PAGE 6
Press and hold the Turbo key, pull the 3d upward; Turbo speed: 5Hz->12Hz->20Hz change 按下 Turbo 按键不放，把 3d 往下拨，Turbo 速度：20Hz->12Hz->5Hz 变化 Press and hold the Turbo key, pull the 3D downward; Turbo speed: 20Hz->12Hz->5Hz change 备注：上电默认 turbo 速度为 20Hz Note: The default turbo speed is 20Hz after power-on. 10.7、手柄休眠清除所有按键 Trubo 功能。 10.7 The Turbo function of all keys is cleared when the controller is under dormancy state. 11、拍照（截屏）功能： 11. Function of Photographing (Screen Shot): 11.
PAGE 7
14.2、本产品在使用时如 3D 摇杆有漂移现象时，请重新连接手柄，也可在主机上进行手动校验后再使用，注意重连手柄时，不要碰到 3D 摇杆。 14.2 If the 3D joystick drifts in use, please reconnect the controller; you can also carry out manual calibration on the console before use; do not touch the 3D joystick when reconnecting the controller. 15、环境条件： 15. Environment Conditions: 序号项目技术指标单位备注 No.
PAGE 8
17.3 This product should be used or stored by avoiding dusts and heavy loads to guarantee its service life. 17.4、本产品因使用不当而造成浸水、撞坏或摔坏，出现电气性能问题，请停止使用。 9.4 Do not use the product which is soaked, crashed or broken or with electrical performance problems caused by improper use. 17.5、不要用微波炉等外部加热设备对其进行干燥处理。 17.5 Do not use external heating equipment such as microwave ovens for drying. 17.6、如有损坏请及时送维修部门处理，切勿自行拆卸。 17.6 If it is damaged, please send it to the maintenance department for disposal.
PAGE 9
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.