User Manual

2 App Installation
1 Activation 3 Get Connected
Set each foot on each side of the central point naturally
as shown below:
4 Start Using
Click on【Me】
3-2 Connect via WiFi
1
Place in the scope of WiFi in first connection
Device
PM
connect to
YUNMAI mini
smart scale
YUNMAI Color
smart scale
Device Management
YUNMAI 2
smart scale
Cancel
PM
“YUNMAI 2”
Searching...keep close to the device
Click on【Device】
2
Click on
【Device Connection】
3
Finish the process as
indicated
4
Product Introduction
A ITO conductive coating x 4
B Concealed Display Screen
C Reset Key
D USB Type-C charge port
E Speaker
A
D
B
C E
Thank you for choosing YUNMAI 2 Smart Scale Place YUNMAI 2 on a flat floor and press the surface until the
screen shows “YUNMAI” to activate it.
Please lay the scale at a place with strong WiFi signal or near
the router when it first get connected. WiFi signal will influence
connecting time and stability.
Under WiFi mode, as long as the scale and the phone are
placed in the scope of the WiFi, then the data will be
synchronized automatically to the App even without opening it.
Open WiFi option on the phone and YUNMAI App and get
connected as the following instructions:
Search“YUNMAI” in the iOS App Store or Android Application
Market or scan the following QR Code to download, install it
and it will get connected to the scale once turned on.
Download <YUNMAI App>
Scan QR Code
Wrong
Feet go out of the verge
may affect the accuracy
Correct
Each foot on each side
of the central point
naturally
Wrong
Feet not in a line may
affect the accuracy
Wrong
Stand in wrong direction
will shield the screen
Note: To ensure the accuracy please stand on the scale barefoot
with the right posture.
iOS 8.0 and above
iPhone 4S/5/5S/6/6 Plus/SE/6S/6S Plus/7/7 Plus
iPod touch /iPad
Android 4.3 and above with Bluetooth 4.0
Mobile Device Support
Measurement results of YUNMAI 2 is only for reference,
but professional medical advice.
Measurement Range: 3-150 Kg.
Important Note
Do not use low-quality plugs and cables.
Refrain from long-time charging in case of short circuit.
Do not charge in damp environment in case of electric
leakage.
Safe Power Charging
Use a wet cloth to clean the scale.
Do not use any detergent and don’t use water to wash it
directly.
Maintenance
YUNMAI 2 Smart Scale guarantees a year of technical
support and hardware warranty.
Warranty
Display and Status
WiFi Connection
Bluetooth Alarm Clock
WiFi Signal Error
Low Battery PowerFull Battery Power
Body Fat
Upgrading
Kg（Unit）
lb (Unit)
Weight gained Weight lost
Sunny
Rainy Snowy
Temperature
Cloudy
Body Statistics Table
18-39
Age
40-59
60-120
＜51% Low
≥ 51% Normal
Body Fat Muscle Ratio
Male
BMI
0-9.9% Low
10-20.9% Normal
21-25.9% Slightly obese
26-60% Obese
0-10.9% Low
11-21.9% Normal
22-26.9% Slightly obese
27-60% Obese
0-12.9% Low
13-23.9% Normal
24-28.9% Slightly obese
29-60% Obese
18-39
Age
40-59
60-120
＜46% Low
≥ 46% Normal
Body Fat Muscle Ratio
Female
BMI
0-9.9% Low
10-33.9% Normal
34-38.9% Slightly obese
39-60% Obese
0-20.9% Low
21-34.9% Normal
35-39.9% Slightly obese
40-60% Obese
0-21.9% Low
22-35.9% Normal
36-40.9% Slightly obese
41-60% Obese
＜ 18.5 Underweight
18.5-24.9 Normal
25-29.9 Overweight
30-34.9 Obese
≥ 35 Grossly Overweight
＜ 18.5 Underweight
18.5-24.9 Normal
25-29.9 Overweight
30-34.9 Obese
≥ 35 Grossly Overweight
Note: Juveniles have rapid physical developments and their body
statistics, such as body fat, BMI and muscle rate may fluctuate
largely, so it is difficult to get an accurate result except the
weight.
Product Specification
Product Name: YUNMAI 2 Smart Scale
Model : M1601
Measurement Unit: Kg /Lb
Connection : Bluetooth 4.0, WiFi
Size: 300 × 300 × 23 mm
Executive Standard: Q / HC 1 - 2015
Net Weight: 1.9 Kg
Weighing Range: 3 - 180 Kg
Accuracy: ±50g
Working Temperature: -5 ℃ - 40 ℃
Exterior Material: Eco-friendly ABS + PC
Battery Type : Li-Polymer Battery
For more information please visit www.iyunmai.com
Hotline: [phone]
Facebook : www.facebook.com/iyunmai
twitter: twitter.com/YunmaiGlobal
Manufacturer: Shenzhen YUNMAI Technology Co., Ltd
Address: Room 10D, 10F, 4C Building, Software Industry Base,
Nanshan District, Shenzhen, China
Smart Scale Instructions
3-1 Connect to the scale via Bluetooth
Open YUNMAI App and Bluetooth and it will get connected automatically,
and your real-time data will sync to the App.
iOS： Slide from the bottom
of the screen to open the
Control Center and click on
the
Android: Click on【Allow】
to turn on Bluetooth when
the system reminds you
when open YUNMAI App
【Bluetooth】 Logo
AllowIgnore
An application wants to open Bluetooth
AllowReject
An application wants to open Bluetooth
FCC ID: 2ADEB-M1601
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
FCC Statement
Me
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.