Add /Remove AP into group: Pls following the step showed in following picture: Configure the AP’s data in group: All the data configed here, such as SSID, password, channel... will applicated to all the AP in this group.
4.3 Device Log For this log part, record all the AP activities for better technical support. Can clear it if no need this info. 4.4 Address Server: Address Server, mean this AC controller can distribute IP address for the Wireless AP connected with this AC controller, to avoid AP’s IP address conflict in setup. Server IP address: mean the server’s IP address, if user set is as 192.168.188.1, then AP will get IP address of 192.168.188.X.
4.5 Intelligent Gateway In this part, AC controller work as enterprise router, can access into more than 200 end users. A. LAN Settings: Click Intelligent Gateway will automatically jump to the LAN settings LAN IP Setting: Set IP address for LAN Subnet mask Set Subnet mask for LAN DHCP Server DHCP server enable mean it will assign IP address for users. DHCP Client IP DHCP Client IP mean the IP address range assigned by DHCP Server. DHCP Lease Time The networking device get IP lease time from DHCP server.
Dynamic IP: WAN interface obtains IP and DNS information through DHCP mode. PPPOE(ADSL): WAN interface obtains IP and DNS information via PPPOE dial‐up mode. Static IP: Set IP and DNS information for WAN interface manual PPTP: WAN interface obtains IP and DNS information via PPTP mode MAC Clone: Specifies the WAN interface MAC, by clicking [Search MAC Address] button, and then will pop up a connected device's MAC, select the MAC desired to clone.
Cloud server should support wifidog. Cloud Server Setting: Enable or Disable. Cloud Server: Input the cloud server’s IP address or domain name. Login Name: mean the account name in this cloud server. Contact infomation: pls input if have. D. Authentication settings and local authentication management. Make authetnication through the cloud server. For this part, pls refer to the authentication user manual. Chapter 5 Firewall 5.
MAC Filtering Enabling Mac filtering, router will restrict data forwarding based on the selected filtering rules; When selected Close, router will decline the pointed incoming data; When selected as Open, then router will allow the pointed incoming rules; Mac address Set up rules in mac address, users can click Searching Mac Address from the clients in routers, or can set up the mac address manually; Mask A simple description of the entry rules, for user’s easier management; 5.
Port forwarding is to forward data from one port to another port, enabling external users have access to an internal private IP in LAN, from an external triggered NAT router ; Rule Type Set up rule type, which have specific port number; Rule name Port forwarding rule name LAN IP IP of the port forwarding External port External port number of port forwarding Internal port Internal port number of port forwarding Protocol Protocol used for port forwarding 5.
A.USB Disk: When insert the USB disk to router’s USB port, then will appear following page show the files directory path and partitions name.User can add/delete the files. B. SAMBA function We can share the files in USB disk to public users through SAMBA server Click SAMBA Settings, then set user name and passwords in wireless router, then apply. C. DLNA function User can build a DLNA server through this function.
Status Enable or Disable QoS function Upload Set up total uploading bandwidth Download Set up total downloading bandwidth IP Address Range Set up IP range of bandwidth MAC address Set up bandwidth control by mac address, user can choose it from Scan MAC, or setup by manual.
User Name Reset new log‐in user name Password Reset new log‐in password Confirm Password Comparison to new password, to confirm user input password correctly in two times; 7.5 Device Log Status Enable or Disable to show system log Remote Log Service To decide whether send System log into some pointed remote server synchronously; 7.6 Upgrade Firmware This feature allows the device firmware upgrade.
7.7 System Time Synchronization with the host Synchronization time with connected PC and router Status Enable or Disable NTP NTP Server Select the server time synchronization Custom NTP Server Setting user‐defined synchronization server IP address Time Zone Setting the router’s time zone Pls note, System time can work under Gateway operation mode. And user can set the automatic reboot of thisAC controller in system time.
Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC (additional information) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
