Installation Instructions

Wireless Driveway Alert
Please read the instructions carefully before using.
Thank you for your purchase! We are delighted that you chose our Wireless Door Bell. Never worry
about surprise visitors again with our Wireless Door Bell・ This easy to use and set up, wireless
Infrared
Motion Sensor Door Bell Alarm includes 1 Receiver and 1 Sensor. Bright LED In dicators and a choice of
38 Chimes allow you to customize your alerts.
We are 100% committed to your customer satisfaction! If at any time you experience issues with your
Wireless Door Bell, please reach out to us.
a. Easy, Fast, Wire Free Installation: Infrared sensor detects motion and sends a signal
to the receiver. Chose from 38 Ringtones with Bright LED Light. Sensor is wall
mountable.
b. Wireless Plug-in Receiver: The portable wireless plug-in receiver plugs into any
standard outlet. The sensor uses 3 AAA batteries (Not Included). Detection time
delay in betwee n motion sen sor alerts is con figurable from 15 sec onds to 30
seconds, just place the sensor at the entrance to your driveway and the receiver in
side your home.
c. Working Range up to 328 feet (100 meters) between receiver and transmitter
allowing you to place it a good distance from the receiver to warn you of arrival
and departure of family members, unwanted guests or solicitors, or any one who
visits your home or business.
d. Ideal for front doors, window frames, driveways, walking paths, and anywhere in
your home you want to be alerted to motion. Also great to alert business owners
that are working in the back, or out of sight, to customers entering their store.
a. Once installed after 30 seconds the unit can detect motion. Once detected it will
send a signal to the receiver. The LED lights will flash and it will chime your selected
ringt one.
b. Allow 15-30 seconds to reset between chimes.
c. Choose the installation postion that are vailable for rectangle compartment, mount
the compartment into required position by using screws, get the two angle of
groove of the round parts mounted at the back of the sensor, then push the
rectangle compartment into round part.
a. Place 3 AAA batteries into the sensor.
b. Plug the receiver into a standard wall outlet where you would like to receive your
alerts.
c. Switch receiver to ON.
d. Use the Volume switch to select your desired volume: Low, Medium or High.
e. Use the Music switch to select your desired chime from the 38 available.
f. If you wish to mount the sensor, connect the mounting pieces together.
g. Use screws to attach the sensor anywhere you wish.
h. Recommended placement of each is no more than 328 feet away, at least 3 feet
from the ground, and if possible in direct clear path of each other for optimal
performanee. Please ensure the sensor and receiver are both placed where wind
could not shift the unit or water and sun light could damage the unit.
I. Features:
II. Set Up:
III. Use:
Wireless Door Bell