Parts List

The product is divided into two parts, male massager and female massager.
Female massager, the flesh part can be clitoral stimulation; the core part can be placed in the
vagina.The female massager can be worn, and there are ways to wear it outside the body (clitoral
stimulation) and inside the body (vaginal placement).In vitro (clitoral stimulation) wear: the
nucleus from the bottom of the host from back to front buckle stable in the hollow part and put
on avocado panties finally long press the host button 1.5s into standby mode and put on
newyogo panties.Put on (vaginal placement): put the nucleus through the hollow part of the
main body, use lubricating fluid to make the vagina fully wet, then push upward into the vagina,
finally long press the main body button for 1.5s to enter standby mode and put on the newyogo
panties.
Start/off and lock
On:Press and hold the button for 1.5 seconds, the host turns on and enters standby mode, which
can be remotely controlled.
Off:In standby mode, press and hold the button for 1.5 seconds, the host turns off.
Travel lock:In the off state, press the button three times in a row to enter the travel lock mode.
Repeat the action again to release the travel lock.
Short press :
Switching gears:Click the button after opening, the pulp + kernel vibrate at the same time, you
can cycle through 8 vibration modes.
One-click orgasm:Double-click the button under any gear to make the pleasure go straight to the
clouds, double-click again to exit the mode.
Male massager
Wearing way: after the penis is sufficiently hard, the button is placed facing upward, pull the
resonance ring and set it to fix the value of the root, long press the host button 1.5s into standby
mode.
Start and shutdown
Turn on:Press and hold the button for 1.5 seconds, the host turns on and enters the standby state
can be remotely controlled.
Off:In standby mode, long press the button for 1.5 seconds, the host turns off. Note:Resonance
ring without travel lock function, if not in use, please directly shut down.
Gear Description
Gear switching: single short press, you can enter the 5 vibration modes in order to cycle
switching.
1-2 gears correspond to weak - strong 2 kinds of [intensity progressive] mode. 3-4-5 correspond
to 3 kinds of [frequency vibration] mode respectively.

Summary of content (2 pages)