Catalogue Information about Safety and Comfortable use Safety instructions Disposal instructions Using tips and information Mini PC Overview Mini PC Connect with other equipments Turn on the computer Turn off the computer Tips about connections
Information about Safety and Comfortable use Safety instructions Please read this instrutor carefully. Please Save this document for future reference. Please follow the warning signs and instructions on the device. Please cut off the power of the product before cleaning. Please cut off the power of the product before cleaning. Do not use chemical or spray cleaners. Please wipe with a damp cloth. WARNINGS! ·Keep this product away from water.
Warning!The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock or injury. Note: The grounding pin also provides good protection against noise generated by other nearby electronic devices that may interfere with the product. Please use the adater that supplies in the accessory box. Output voltage 12V, current 5A, length 150mm. Can be used in the voltage between (110V-240V). Maintainance Do not repair the device yourself.
Network cable security ·Unplug the network cable from the wall outlet before you need to repair or disassemble the device. ·Avoid using the cable during thunderstorms, which may result in indirect lightning strikes. Disposal instruction Do not dispose of this device as normal waste before discarding it. To ensure that pollution is minimized and contributes to global environmental protection, please follow the resource recycling method.
MERCURY ○ Hg For projectors or electronics that include LCD/CRT monitors or displays: The lamp contained in this product contains mercury and must be recycled or disposed of in accordance with local, state, or federal laws. For more information, please contact the Electronic Industries Alliance at www.eiae.org. In order to get more information about the lamp, please check www.lamprecycle.org Hg ○ Tips for Using comfortable Computer users may complain of eye strain and headaches after prolonged use.
Protect your vision Prolonged viewing, improper wearing of glasses or contact lenses, glare, excessive room light, poor screen focus, too small fonts, and low contrast on the display can oppress your eyes. The following sections provide suggestions on how to reduce eye strain. ·Make a good rest for your eyes oftenly. • Leave the monitor at regular intervals and see something far away to let the eyes rest. • Always blink to keep your eyes moist.
Overview of the Mini PC Panels What’s on the front panel and the rear panel: Power swithch C CRT/LCD Display port DC power connector HDMI LAN Microphone input USB Earphone/Sound output Digital audio interface (some configurations are not equipped) Reference Specifications Wireless Connectivity 802.
Install the Mini PC Furnished comfortably work area The layout of the work area and the correct use of the settings are prerequisites for safe and comfortable work. Therefore, it is important to take the time to consider how to lay out the work area. Refer to the illustration on the next page when arranging the work area and installing the computer. Here are a few things to note: Adjust the seat Choosing the right type of seat does not necessarily support the body effectively.
conditioning equipment. • Avoid placing it in dusty, high (or too low) temperature and humid places. • Place your computer near your desk or under the desk as long as it does not interfere with the space required for work and activities. Place the monitor Install the monitor in a comfortable viewing position, usually at a distance of 50-60 cm. Adjust the display so that the top of the screen is level with the eye or slightly below the eye.
Connect the monitor When connecting the monitor, simply plug the monitor into the monitor port (blue port) or HDMI port on the back panel of the computer. Note: Please refer to the monitor manual for detailed instructions and information. Connect the power cable Please make sure that the AC adapter is properly plugged into the computer and to a power outlet. NOTE: Before proceeding to the next step, check the voltage range in your area to confirm that it matches the voltage setting of your computer.
Take good care of the AC Adaptor Pay attention to the following points when storing the AC adapter: ·Do not connect the adapter to any other device. ·Do not step on the power cord or put heavy objects on the power cord. Carefully route the power cord and the cables to avoid obstructing activity. ·Do not pull on the cord when pulling out the power cord. Should pull the plug out slowly. ·If an extension cord is used, the total rated current of the inserted device must not exceed the rated current of the cord.
Connections Internet connection The computer can be connected to a local area network (LAN) via a network cable. Just plug the network cable into the network port on the back panel of your computer. Once connected to the network, you can access other computers on the network. You may be able to store and retrieve information, use a network printer, a modem, email, or connect to the Internet. You can also share files or create a small network between two computers.
For the safety of you and your device, Be sure to clean your computer in accordance with the rules in this appendix, as well as guidelines that will allow you to work more comfortably. This product has been designed and rated to comply with the latest information technology and audio and video equipment safety standards. However, the most important thing is to follow the safety instructions on the product and in the manuscript.
[WARNING] It is strictly forbidden to insert any object into the product through the vent on the cabinet. This is dangerous and can damage your computer. Do not repair by yourself This product does not have any parts that users can repair themseves. Don't try to open the case of your mini computer. If your mini computer needs service, check the service and support information that came with your computer to find out how to contact an authorized service provider for service.
Laser information [WARNING] Adjusting or performing operations other than those specified in the equipment manual may result in exposure to radiation. Never attempt to disassemble the chassis containing the laser assembly. The laser beam used in this product is harmful to the eyes. Using optical instruments (such as magnifiers) with this product may increase eye damage. For your safety, this device may only be serviced by an authorized service provider.