Contents Foreword..........................................................................................1 Appearance and Button ................................................................4 First Use..........................................................................................6 Desktop ............................................................................................7 Main Menu Operations ................................................................
Foreword 1. Announcements Maintenances ●Please keep Device dry. Do not let equipment, battery charger contact water and vapor, or use wet hand to operate equipment or charger, Lest cause short-circuit, corrosion caused by equipment failure, and personnel. ●Don’t make equipment, battery and charger strongly impact or vibration. Lest cause equipment, battery and charger fault, fire or explosion. ●Don’t put this equipment, battery and charger in the too high or too low temperature region.
otherwise it may lead to electronic equipment disabled. ●Do not unauthorized to remove Device and accessories. Only authorized institutions can repair this Device. ●Please put Device away from magnetic equipment. The radiation of Device will erase information which is on magnetic storage device. ●Please don’t use Device in the high temperature and flammable areas (such as near gas station).
1. VOL+:Press to increase the volume of headphones or speakers. 2. VOL-:Press to reduce the volume of headphones or speakers 3. POWER: if turned off ,press two seconds to start the system.if turn on,short press can lock and unlock the screen,long press two seconds there will be “ power off” selection. Note: In the case of software carshes,long press power for 8 seconds ,the device will be forced to shut down,this function is s uggested only in system halted.
7. TF Card slot: External Micro SD card, up to 128GB. First Use Battery Management and Charging ●Please make sure that the device battery is fully charged on first usage. ●Just plug the charger into DC interface for charging. ●Keep the first two charging time about 6 hours. And around 4 hours next time. 【NOTE】This item was featured with built-in polymer battery, the charger should be comply with the specification of Input: AC100-240V, 50/60Hz, Max: 0.3A. Output: 5V/2A.
Press the Power button, after one seconds will enter the interface of unlock the screen. Hold slide to right, the icon will turn to and the screen will unlocked. After the system is started up, you can see AndroidTM system desktop (refer to the picture below), the default system desktop: status bar, instant search button, main menu icon and shortcut icon.
●To move an icon to the Desktop screen, touch & hold on the icon, then release it when it appears on the Desktop screen. ●Touch, hold the icon for 3 seconds, press Remove, then will delete it from the Desktop. Application Management Install Android Applications ●There are many interesting and free Android applications that can be found on the web. Just launch your web browser and do search for Android apps.
Uninstall Android Applications ●You can also quickly and easily uninstall the Android applications that you have installed. 1. Tap Settings →Applications → Manage applications. 2. Tap the application you want to uninstall → Uninstall. 3. Tap OK to confirm the install. PHONE ●To use calling functions, tap Phone from application list. 1.Make calls To make calls, you can use any of the three ways: Enter numbers by using the virtual numeric keypad on the screen Make a call from call log.
●Call settings To change call settings, tap the option button at the upper right. 1.Fixed Dialing Numbers If FDN mode is activated, your device will restrict outgoing calls, except for the numbers stored in the FDN list. 2.Quick responses Quick response is a feature to reject the call with the predefined messages. Tap one of the pre-written messages to be displayed when you want the call to be rejected, then tap OK. Contacts ●Tap Contacts from application list to access contacts. 1.
2.Tap the option button at the upper right, then select Edit. 3.Change necessary fields. . ●Create new group 1.Tap the first tab at the upper left. 2.Tap at the upper right. 3.Enter a category name. . ●Rename group 1.To rename the group, scroll to the group you want to change. 2.Tap a t the upper right or tap the option button and then select Edit. 3.Enter a new category name. ●Import/Export contacts 1.
name or number, your device shows the result immediately. MESSAGE Learn to create and send a text or multimedia message, and view or manage messages that you have sent or received. ●View messages 1.Tap Messaging from application list. 3. Tap the message to view the detailed information. ●Create and send SMS 1.Tap NEW MESSAGE. 2.In To field, enter the recipient’s mobile phone numbers manually. If you enter more than one number, separate the numbers with a comma. 3.
Record audio: Record sound clip and insert the sound clip. Slideshow: Add more than one slide. 5.In To field, enter the recipient’s mobile phone numbers or email addresses manually. If you enter more than one number or email, separate them with a comma. 6.In Type message field, enter the text of the message. Select Send to send the message. CLOCK ●Tap the Clock application icon. You can use your device as an alarm clock by setting multiple alarms. 1.Tap Set Alarm → Add Alarm, set up your alarm as desired.
enter your login information and then tap login again. 2. You can select applications from the default Featured group, by Categories, Top (latest, hottest, random), or search by name. 3. Tap on an application, → Download. 4. After the app is downloaded, tap Install. 5. Tap Open to launch now, or Done to return to the Play Store screen. After downloading apps, tap on History to manage the installed applications. You can add and/or view comments from other users, launch apps, and uninstall them.
●For the first time to using the Calendar, you need to add an Exchange account. Enter account email address and password. Click Next and follow the prompts to complete the account configuration. Then you can use the Calendar. Add Event 1. On the Calendar screen, tap on the date to which you want to add an event. 2. Tap on the event time, tap in each entry field to enter the desired event information. 3. Tap Done. 【NOTE】Dates with green bars indicate scheduled events. CAMERA 1. Take Pictures 2.
GmailTM POP3 and SMTP accounts are supported. ●You can enter one or more personal email address that you would like to access through your Tablet. 1.Tap the Email application icon. 2.Tap in the Email address entry field, enter your email address. 3.Tap in the Password entry field, enter your email password. 4.Tap Done. 5.Manual Setup (Optional): The server settings are automatically populated based on your email account provider (i.e., gmail.com, etc.).
previous/next, adjust brightness). Settings Google, Android, Google Play and other marks are trademarks of Google LLC.
Samrt controls Samrt wake/lift to check phone/samrt motion Battery usage data Battery Display Brightness/Wallpaper scheduled power on /off Navigation bar Yes/no Select a combination of navigation buttons Select predefined / defines audio profiles Total space/Apps space/Available space Audio profiles storage Security &location Screen lock/Owner info /Encrypt tablet /Make passwords visible Acconuts Sync on the account information.
Into the load mode, you can copy, delete the file on the device and the file on the memory card. OTG Using ●Support FAT32 format mobile memory devices, such as USB disk. ●The way for Plug and play. ●Use OTG cable to connect MID USB OTG PORT with other devices Trouble Shooting ●Device fails to turn on. ﹡ Check battery volume. ﹡ Connect to adaptor, and double check. ﹡ If device fail to start up after charging, please contact distributors. ●Twinkling screen after turn-on or sudden shut off after starting up.
SPECIFICATIONS Voltaje: DC 5V Battery Type: DC 3.7V Product name:tablet Model:T702,T702 Pro, T901, T901 Pro, TB02, TAB10, TAB7, TAB8, TAB9, P30, P40, P50, P60, T10, Y101, T88, T618, YC01, DM01, N01 FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
