. Precaution To avoid fire or electrical shock, please do not expose this product to rain or moisture. To avoid short circuit, please make sure the battery contacts are securely packed, and use the batteries in accordance with the local provisions. Please place the batteries and the pairs which can be mistakenly swallowed away from the children. If swallowed, please get medical help immediately.
II. Features © [NEG] TOYNBEE 150100, 19mm High guide number 2.4G wireless speediness, supports M/Multi- mode.
# [Sound] Special sound prompt system Turn on the sound prompt function, the speed-lite will prompt the working state, allows you to focus on the creative process (note: the sound prompt can be muted off). # [Zoom] Supports electric zooming function Through short press the [ZOOM] button and rotate [Select Dial], the flash coverage can be changed between 24~199mm .
111. Quick Start I you don’t have much time to go through the user manual, we advise you to read this section. 1.To effectively extend the service life of this product, please avoid overusing the mex output power. 2 Please press each button and observe the display content on the LCD screen to meal the function of this product. 3 Short press [Backgrounder] bunion to tum on/off the back light of the LCD screen and long press to tum on/off the sound prompt.
@D Bounce angle index @ Battery compartment caver 3 button @ Battery compartment cover lock lever @ length/advanced options bunion 5 switch @ Lock-release button @ Mounting foot lock lever % [Link] Wireless signal Indicator 98328808 ® & LCD panel @ [Trigger mode] bunion &) [Backgrounder] button &) [MODE] flash mods button @ Charging indicator light/Test button @ [OK] Set bunion @ Select Dial @ Dust and water resistant adapter
2.
V. Installation Instruction 1. Install Batteries Sikhs the [batiste compartment cover] In the direction of the mow as shown to open It Install the batteries according to the pointing on the tags In the compartment and make sure the orientation of the battery contact is compact. Side the [battery compartment cover] in the direction of the arrow as shown to close it. Nos: please user four standard specification AA batteries. To avoid circuit, please do not use damaged batteries 2.
3. Detach the Speedily To detach the speedily, press the [ck-release button] and slide the [Mounting foot lock lever] to the left side, then detach the speedily. 4. Power-On and Power.
6. Lock Function Set the switch to position fo lock the operational buttons except | [TEST] bunion. With this function, the setting parameters defined will be protected from being changed accidentally.
VI. Basic Functions 1. Basic Operations Button Operation: Button Operation [FLINTLOCK] switch | 1. Power overpower off; 2. Disable the buttons. [MODE] bunion Through the button can switch between Multimillionaire [TRIG MODE] button | Through [TRIG MODE] bunion oan switch the trigger mode: sst top TX/RXS1/82. [Soundtrack] button 1. Short press to bum on/off the fightback of the LCD screen; 2. Long press about 2a to tum tum on off the sound prompt. 1.
TX master mode and RX slave mode grouping display status and meaning: Grouping display status Meaning TX master flash made RX slave flash mode Gr The Seth mod Stash output and foo length of the on camera master flash can be adjusted at the moment. GRA “The flash mods flash output and focal Strength of the off camera Group A flash can be adjusted at the moms [The unit used as a slave flash unit In Group A. GRB eis aes can bs adjusted at the ‘and focal B flash [The unit used as a suave flash unit in Group B.
Meaning of [Indicator Light] [Status of [Charging Indicator] Meaning Method Rad light |The spatted Is fully charged and can be used. Normal [Low beetle of hs speeds hes not been Tuy [ita sighting bis Tor Lang Fours, pisses Blue light charged. Behan ho barrister. = P Rad light blinking | The flash is in sitemap mods. AFFILIATION to weeks up the spacesuit. The meaning of [Sound Prompt] Sound mode Meaning Operation .
2. M Mode In M mode, you can set the flash output as your requirement and adjust the flash output through [Select Dial]. The adjustment range of I flash output is The output can be divided into 8 grades, Ines and each has maximum 3 grades for fine adjustment, with grade 0.3EV and D.5EV as adjustment increment. When shooting, you should just set the flash output, adjust the camera and press shutter, the steadiness will flash with the SYNC signal from the camera. 3.
4. TX Master Flash Mode Short press the [TRIG MODE] button to switch the trigger mode. TX master fish mode supports 2.4G wireless transmission signal, It can be used as master unit to directly rigger SYNGE, YNS60IV and YN5EGII In RX slave flash mode, or used as the TX modules of the wireless trigger RF602, RF603 (II) and RF60S.