Manualshelf

User's Manual Part 2

ManualsBrandsSHENZHEN YONGNUO PHOTOGRAPHIC EQUIPMENT ManualsElectronicsWireless Flash Trigger
12345
Shutter release function
Connect the shutter connecting cable: need to use(or
purchase additional)the corresponding type of the LS-2.5
series shutter connecting cable. As the picture 1 shown, use
the shutter connecting cable to connect between the camera
shutter socket and transceivers.
1.RF-602 mode: Supports wireless shutter release, the
transmitter set to “TX”stauts,the receiver set to “RX”.
2.RF-603 mode: Supports wired shutter/wireless shutter
release, all transceivers set to “TRX”stauts.
As the picture 2 shown, half press the multifunction button
on the transceiver(transmitter), the camera will focus. The
focus light bright (Green),full press the button, the camera
will shoot, meanwhile the shutter indicator light bright (Red).
In RF-603 mode, single transceiver can be used as wired
shutter release (as the picture 3 shown).
8
Picture1
Picture2
Picture3

Summary of content (5 pages)