Wireless Flash Trigger 无线引闪器 User Manual 使用手册
Contents Thank you for purchasing YongNuo products in advance. Please read this user manual carefully and learn how to use camera and flash before. This product is a wireless transceiver integrated design, for the convenience of description, the product will named “transmitter” when mounted on the camera hot shoe in some cases, while named “receiver” when mounted or connected to the flash. General description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Cautions . .
General description RF603 II adopts a global free FSK 2.4GHz wireless channel which can be suitable in many countries. RF603 II with FSK system, can be more effective to guarantee speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m, and suitable for RF603I. RF603 II wireless flash trigger kit is formed by two same transceivers.
Cautions 1. As this is an electronic product accessory, some of the environment causes may affect the working. However this is hardly ever to get this situation, don't worry. 2. Do not pull the wires and turn off the camera when connecting. 3. For a long time non-use, please turn the transceiver off and remove the batteries. 4. Do not put it in high temperature, such as a closed car under direct sunlight, the control panel and other high temperature areas. 5.
Include items/Optional Accessories Include items: RF603C II or RF603N II . . X2 LS-2.5 Shutter Cable* . . X1 User Manual . . . . . . . X1 *Shutter Cable shown according to the packaging. Optional Accessories: 1.The LS-PC series flash cable LS-PC635 LS-PC/PC 2.The LS-2.5 series shutter connecting cable LS-2.5/C1... You can additionally purchase the shutter cable or PC sync cable if needed.
The name of each parts of RF-603 II The RF603C II is more suitable for Canon cameras. A: Focusing indicator light (green) / Shutter indicator light (red) B: 2.5mm shutter remote cable socket C: Hot shoe / Hot shoe contacts D: PC socket(output) E: Awakening indicator light (green) / Flash trigger indicator light (red) F: Multifunction button The RF603N II is more suitable for Nikon cameras. G: Power switch-1.TX (transmit) 2.
Preparation before using 1.Channel Setting: Use the channel setting switch to set the transceivers to the same code, total 32 channels. 2.Battery Installation: Slide to open the battery room, install two AAA batteries(not include) for two transceiver according to the "+/-" marks shown. 3.Fix the transceiver on the camera hot shoe: Mount the transceiver on the hot shoe of the camera by hot shoe mounting foot, then tight the locking screw.
Preparation before using 4.Fix the transceiver on light stand or flash bracket : Mount the transceiver on the mini stand of the flash attached or other fixed device (not included), and tight the locking screw. 5.Fix the flash on transceiver: Install the flash on the hot shoe of the transceiver, lock the flash and ensure all links are fixed well. 6.
Preparation before using 7.Power Switch and Transmit-receive State Settings: Set the power switch on TX (single transmit) or TRX (transmit-receive automatic switch) state according to different shooting requirement. When it used as wireless triggering transmitter and flash testing, set to "TX"; while used as wireless triggering receiver, using shutter release or other extended functions, set to "TRX", as the table shown, set to OFF means turn off the power.
Wireless flash trigger & testing 1.The flash Awakening Half press the multifunction button of the transmitter or the button of camera shutter, the awakening indicator light of transmitter and receiver will be bright (Green), at the moment if the flash is in dormant state, it will be awakened. 2.Test and trigger the flash Fully press the multifunction button of transmitter to test the flash once.
Wired/wireless remote shutter release function This product can achieve wired /wireless remote shutter release function, need to LS-2.5 series shutter connecting cable(or purchase) according to the different cameras. When using the shutter release, the power switch need to set in”TRX” state. 1.As the picture shown, use the shutter release between the shutter socket of camera and transceiver. 2.Single transceiver can be used as wired shutter release. 3.
Function extend 1.Handhold the flash for remote flash trigger sync Take the RF603 II on the flash as shutter release remote control, LS-2.5mm series shutter connecting cable needs to be used. The transceivers should set in “TRX” state. 1.Install the handhold flash on the hot shoe of the transceiver as transmitter, and lock the flash. 2.
Function extend 2.Remote shooting with flash trigger sync Examples of using multiple combinations of RF603 II, LS-2.5mm shutter connecting cable needs to be used, and several RF603 II transceivers needs to be purchased. 1.Install one transceiver on the hot shoe of the camera, and connected the shutter socket with the shutter connecting cable to the camera. 2.Install the flash on the hot shoe of the other transceivers, or connect to studio flash lights with PC sync cable. 3.
Troubleshooting 1.Unable to test the flash or wireless trigger the flash Make sure the battery is full and the transceivers are in the same channel. F F Set the power switch of transmitter to TX state then test the flash, it could not test flash when setting to TRX state. F Make sure the flash have been prepared and set to manual “M” mode.
Specification Type: FSK 2.4GHz wireless remote control system Transmission distance: 100m Channels: 32 channels Shutter release: half-press, full-press Shutter interface: 2.5mm socket Studio flash light interface: standard PC socket Max Sync Speed: 1/320 second Battery: AAA×2(3V ) Stand-by time:about 400 hours in TX state,about 45 hours in TRX mode. Size (W x H x D): 38MM x 88MM x 33.5MM The functions of this user manual are based on test conditions of our company.
FCC ID: 2ACYPRF603C This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
