Operation Instructions

ETEKJOY RFID Electronic Lock for Wooden Cabinet / Drawer
Warning: Please ensure that batteries are installed before closing the cabinet door, to avoid being locked out.
Video about how to set up admin card and user cards: https://youtu.be/F876S1dL3YY
Features:
1. The cabinet wooden door should not exceed 1.2 inches thick
2. Multiple Unlock Mode: Single Unlock Mode, Dual Unlock Mode
3. 2 x AA 1.5V batteries required
4. The batteries can last 8-12 months under normal use
5. The sound alarm will alert when the batteries power is low
6. The lock will unlock (pop open) automatically shortly before the batteries go dead.
7. 1 admin card and up to 10 user cards can be set up on this lock kit.
Operation Instructions
1. Reset
Install 2 x AA 1.5V Batteries. Press the reset button in the backside of the lock body until a long beep.
2. Set Up Admin Card
After resetting the lock, swipe a RFID card / tag, this first card / tag will be configured as the admin card.
3. Select Unlock Mode (Single Mode is 1-card-swipe to unlock. Dual Mode is 2-card-swipes to unlock!!)
After setting the Admin Card, you should select the unlock mode.
(1)Press the reset button shortly and release, if you hear one short beep and one long beep, this is for Single Mode.
(2)Press the reset button shortly and release, if you hear two short beep and one long beep, this is for Dual Mode.
4. Set Up User Cards
Swipe the admin card, then swipe the new cards, which you want to add as user cards during the beeping.
5. Delete Cards
(1) To delete all user cards: swipe the admin card 3 times.
(2) To delete the admin card and user cards: same as Reset. After Resetting, you can set up new admin card.
6. Low Voltage Alarm
Please use two 1.5V AA Batteries. When you swipe the card to unlock, the voice alarm will alert (you can hear a long
beep) if the battery power is low. You still can swipe card to unlock for 50 times max. Please replace the batteries
ASAP. The lock will unlock (pop open)) automatically shortly before the batteries go dead.
Package Includes:
1x Lock Body, 1x Latch, 1 set x Screws, 1 set x RFID Card/Tag, 1x Icon
If you have any question, please feel free to contact us by email: [e-mail]