How-To Guide

ManualsBrandsShenzhen Yitequ Technology ManualsElectronicsElectronic Door Lock

1 / 6

Note: There is a removable protective film on the keypad. Not scratches! If you like, you can peel it off

after installation.

Below are some how-to videos.

#1. Video about how to install the handle and tumbler:

https://youtu.be/HsGX5VQmpKk

#2. Video about how to install the lockset to the door:

https://youtu.be/nNBn5E4efV0

#3. Video about how to set up RFID cards to unlock:

https://youtu.be/DzwHWsh5hkU

#4. Video about how to set up passwords to unlock:

https://youtu.be/8SmId2pEpUY

If you have problem in use/installation, please feel free to contact us for assistance by email:

support@etekjoy.com

Summary of content (6 pages)

PAGE 1
Note: There is a removable protective film on the keypad. Not scratches! If you like, you can peel it off after installation. Below are some how-to videos. #1. Video about how to install the handle and tumbler: https://youtu.be/HsGX5VQmpKk #2. Video about how to install the lockset to the door: https://youtu.be/nNBn5E4efV0 #3. Video about how to set up RFID cards to unlock: https://youtu.be/DzwHWsh5hkU #4. Video about how to set up passwords to unlock: https://youtu.
PAGE 2
Quick Guide There are 3 ways to reset the lock. #1 Method: Press the Reset Button. #2 Method: Read the admin card 7 times (Swipe 7 times) #3 Method: Input codes: admin password, #, 7. Examples of password settings Change default admin password 12345678 to new admin password 87654321.
PAGE 3
5 times Delete all user cards Three long beeps. Red light blinks. Buzzer beeping twice quickly means deletion completes. 6 times N/A One short beep. Red light blinks. 7 times Reset the lock to default One long beep. Red light links. Buzzer beeping twice quickly means resetting completes. 3.Set Up User Card 3.1. Swipe admin card. One beep. Motor turns (unlock). Green light blinks. Enter the mode of setting up user card. 3.2. Swipe a new card. One long beep means setting successfully.
PAGE 4
Input new 8-digit admin password 1 long beep Press button # Re-input the new admin password Green light on, 3 long beeps Press button # Setting done If inputting wrong admin password at the second time (Two times’ don’t match) 5 beeps Re-input new admin password Green light on, 3 long beeps Press button # Setting done Or press button * to exit.
PAGE 5
press button # after 5 beeps Re-input password Done Press button * to exit 5. Unlock 5.1 By RFID Card Swipe a card in the sensing area, motor turns after 1 beep, green light on. Unlock. The lock will re-lock automatically if it detects the action of opening door by the handle. If no action, 3 seconds later, green light off, it will re-lock automatically. 5.2, By Admin Password Input admin password and #, 1 beep, motor turns, green light on, unlock.
PAGE 6
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.