ISV-100W Sous Vide SMART HOME SMART LIFE
Contents 01 Introduction --------------------01 02 Basic Operation ----------------03 03 Settings -----------------------04 04 Wi-Fi Connection --------------06 05 Important Safeguards ----------09 06 Warranty -----------------------11
01 Introduction LCD Screen Control Panel Indicator Light Handle Max Fill Line Clamp Detachable Stainless Steel Column Min Fill Line Water Pump Cap Note: Please do not try to remove the water pump cap by yourself at any time, it may lead to machine failure.
1.1 Icons in this Manual Wi-Fi Connection Status Set Temperature Working State Current Temperature Remaining Time Set Time Run/Stop Button Set Button +/Wi-Fi Reset Button -/cfg Button 1.2 Specifications Length of the Cable: 1.2m/47.2" LCD Screen: 128*128 Dot Matrix LCD Screen Screen Size: 36mm(W)*42mm(L)/1.42"(W)x1.
Heating Power: 1000W Input voltage: (US)AC 120v 60Hz, (EU,UK,AU)AC 220~240v 50Hz 1.3 Item List 1. Sous Vide*1 2. Manual*1 3. Warranty Card*1 02 Basic Operation 1. Put the Sous Vide into a container. 2. Clamp the Sous Vide to the pot to fix it. 3. Fill the container with water. 4. Plug in the Sous Vide. 5. Set the temperature and the time for your food. 6. Place your food in a sealed bag and squeeze the air out, then lower the bag into the water when it is at the right temperature.
03 Settings 3.1 Temperature setting and timer setting 1. Press the “ ” button to enter main interface setting mode. 2. When the set temperature icon is flashing, you can adjust the temperature by pressing the “ ” button or “ ” button. 3. Press the “ ” button again to set the hours of the countdown, another press on the “ ” button to set the minutes of the countdown. Note: Long press on the “ ” button or the “ ” button will increase or decrease the temperature value quickly. 3.2 Choose a preset mode 1.
the calibration interface. 2. Press the “ ” button to choose “ Calibrate ”. 3. Press the “ ” button or “ ” button to calibrate the temperature. 4. Hold the “ ” button for seconds and it will go back to main menu. 3.4 Change between Celsius unit and Fahrenheit unit 1. Press and hold the button “ ” to enter the temperature units setting interface. 2. Press the “ ” button to choose temperature unit. 3. Press the “ ” button or “ ” button to choose between Celsius unit and Fahrenheit unit. 3.
04 Wi-Fi Connection 4.1 Get Smart app for your phone Get the Smart app or the Pro app from Google Play or App Store to download the preferred app for free, or you can scan the QR code to download the preferred app directly. Pro IOS Android 4.2.1 Connect to your phone 1. Register before using the Smart app. Select your Country/Region, enter your e-mail, then a verification code will be sent to your mailbox, enter it to confirm your identity and the registration is done. 2.
your app if it is, then enter your Wi-Fi password to connect to wireless network, click OK to connect the device. 4. Connection succeed. Note: If you have registered an account before, just log in directly. 4.2.2 Connect the device in AP mode If the device is not connected to your phone, the Wi-Fi icon flashes rapidly by default. Press and hold the “ ” button for seconds to switch to AP mode, the Wi-Fi icon flashes slowly in AP mode. 1. Open the app and click “ + ” to start the connection. 2.
seconds to reset the Wi-Fi, then repeat the steps to connect with your phone. The device only supports 2.4GHz Wi-Fi router. 4.4 Operation Interface on Inkbird Smart Device Name Recipe Working State Current Temperature Remaining Cooking Time Calibration& Temperature Units Run/Stop Temperature Setting Timer Setting You could control the Sous Vide with Smart app on your phone at anytime anywhere. All functions are available on the app. 4.
1. Tap Me to enter the interface. 2. Tap Home Management > owned > Add members, you will then have the chance to invite another user. 3. New users will have to download the Smart app on their phones and create a account. 4. Enter the account number of your friend or family member and set the user as an administrator. 5. Back to main interface, the administrator could check your device and their owns by clicking the left top corner.
6. Do not cut the cord, or put it on hot surfaces. 7. Do not place on or near a hot gas or electric burner, or in a heated oven. 8. Place the Sous Vide or related containers on a heat-safe surface or trivet, away from counter edges. 9. The water level should not exceed the " MAX " scale line of the stainless steel part. 10. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids. 11. Never use deionized water with Sous Vide as it may damage the Sous Vide. 12.
Children should be supervised to ensure that they do not play with the appliance. Close supervision is necessary when any appliance is used by or near children. 06 Warranty This Limited Warranty applies only to Sous Vide. What is Covered and for How Long warrants that all new products are free from defects in manufacturing, materials and workmanship for a period of one year from date of retail purchase.
How to Obtain Warranty Service To obtain warranty service for products purchased from a third-party, retail or directly from you must return the product with proof of purchase using the following procedures: 1. Contact Inkbird Customer Support for specific return and shipping instructions by email. Email Address: support@ink-bird.com You may be asked to complete a warranty service request form.
IN THAT EVENT, SUCH WARRANTIES APPLY ONLY TO THE EXTENT AND FOR SUCH DURATION AS REQUIRED BY LAW AND ARE LIMITED IN DURATION TO THE WARRANTY PERIOD.
FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
