SW501 Smart Watch Quick User Guide The device contains tiny parts and is not suitable for children under 3 years old. Please keep it out of children’s reach.
Button Description -1-
Package Contents Watch Charge Cable Watchband Other accessories: Quick User Guide -2-
How to Use 1. Power On/Off To power on, press and hold the Power button for about 2 second until you feel a bit vibration.
To power off, press and hold the Power button for about 2 seconds, and then tap “OK” to confirm.
2.
Turn over page Slide your finger on the screen to turn over the page.
Applications A. Nextone Pedometer B. Weather Count your walk steps and calories that your body consumed each day to monitor your daily exercise. Real-time weather forecast.
C. Notifications D. Find the phone Notifications of incoming calls, messages or SNS. To find your phone by making your phone ring or vibrate.
E. Camera Remotely control your phone’s camera to make a self-timer.
Go Back Press the Home button.
3. Pairing with Smart Phone (1) Slide rightwards to display menu and select “Settings”.
(3) Turn on the Bluetooth, and select the Smart phone from device list.
(4) Start pairing.
(5) Tap “OK” after pairing.
Indroid Sync Mobile Information in your smart phone such as contact list, message, etc can be synchronized with your Smart Watch by the application Indroid Sync Mobile. Before synchronization, firstly you need to install the application Indroid Sync Mobile in your Smart Phone. The Indroid Sync Mobile apk is available at http://dl.yifangdigital.com/file3/yfly/sync.apk Please kindly note that the application Indroid Sync Mobile can only be used in Android Phones.
1. Install Indroid Sync Mobile APK in your Android Smart Phone.
2. Pairing Smart Watch with Smart Phone by Bluetooth. Choose Settings both in Smart Watch and Smart Phone to open Bluetooth and then choose Scan to search and pair.
3. After paring Smart Watch and Smart Phones, you will be reminded to confirm with passkey and then click OK both in Smart Watch and Smart Phones.
4. Run the application Indroid Sync Mobile in your Smart Phone, and then click the lower-left button in the Phone and choose Setting to set detailed sync information.
5. Click Sync Settings under the Setting and then choose items from the list to be synchronized with your Smart Watch. During the sync process, please make sure Bluetooth in your Smart Phone and Smart Watch are paired.
6. Quick SMS is used to set quick response to message. 7. Cancel Bonded is used to disconnect Bluetooth between the Phone and Smart Watch.
during the synchronization. If you want to use another Smart Watch or another Phone, you can cancel the bond firstly.
8. System Update shows the current application version.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.