User's Manual

IEEE802.11a,IEEE80211n.
IEEE802.11g,IEEE802.11b
Introduction
Thank you for purchasing the Wireless-LAN USB Adapter.
Wireless-LAN USB3.0 Adapter allows you to connect notebook
or desktop to any Wireless-LAN networks suitable for in your
home or office environment.
Spotlight
1).
2). Wireless security encryption easily at a push of WPS button
Dual Band (2.4G : 300 Mbps ; 5G : 867Mbps)
Product description
The product is a high-speed USB3.0 WLAN adapter,supports
2.4G/5G.Complies with
standards.Supports 64/128-bit
WEP,WPA,WPA2 encryption methods and 802.1x security
authentication standards.
Additionally,this product supports WPS function,which can help
you create a wireless connection with effortless security setup,
prevent outside intrusion and protect your personal information
from being exposed.
Featuring high performance transmission rates,simple
installation and adaptability,as well as strong security,this USB
WLAN Adapter is a perfect solution for small office and home
need.
Product Specifications
System Requirements
Notebook or desktop PC with Pentium 1 GHz-compatible or
higher Processor
Windows XP/Vista/WIN7,MAC OS , Linux
Available Hi-Speed USB 2.0or 3.0 port
Standard
Wireless Modes
Interface
Frequency Range
Radio Data Rate
Spread Spectrum
Modulation
Transmission Distance
Receive Sensitivity@PE
Transmit Power
Antenna
LED Indicator
Data Security
Environment
.
IEEE 802.11a、IEEE 802.11n、
IEEE 802.11g、IEEE 802.11b
Ad-Hoc / Infrastructure mode
USB 3.0
2.4GHz/5GHz
2.4G: 300Mbps 5G: 867Mbps
DS S S
BPSK, QPSK, CCK and OFDM
(BPSK/QPSK/16-QAM/64-QAM)
Indoor up to 100m , outdoor up to 300m
(it is limited in an environment)
11a : -68dBm@10% PER
11n : -70dBm@10% PER
11g : -70dBm@10% PER
11b: -85dBm@8% PER
1 dBm
Internal Antenna
Status
64/128-bits WEP;WPA/WPA2
Operating Temperature: 0℃~40℃ (32℉~104℉)
Operating Humidity: 10%~90%RH (non-condensing)
79mmx26mmx10mm
Dimensions
Installation
IMPORTANT:For proper operation,do not connect the Wireless-
LAN USB Adapter to your computer before you install the
software. If you do,wait for the Found New Hardware screen to
display and click “Cancel”,otherwise, the installation process
will likely be adversely affected.
1). Insert the included setup CD in the CD-ROM drive and start
the Setup.exe program.
2). Insert the included setup CD in the CD-ROM drive and start
the Setup.exe program.
Click “NEXT”
3). The installer will automatically install the program.When done
Select ”Yes,I want to restart my computer now” and click”Finish”
to reboot your computer after the driver install successfully.
Configuration
Once the installation complete,you can configure the Wireless-Lan USB Adapter
to connect to a wireless access point(AP). The wireless configuration utility will
start automatically and you’ll also find a tray icon at the lower right corner in
your Windows systems tray.
1 Right-click the Wireless tray icon and select “Open Config Utility”).
2).
“Refresh” to refresh the list of available wireless networks. To join a
particular network that displays,select it and click “ Add to Profile.”
The configuration utility will scan for wireless networks with in range.Click
3). If the wireless network use encryption,you need to input the
correct encryption key.The configuration utility automatically
suggests the correct authentication type (see the drop-down
list),and you should not change the suggested value.
NOTE
For WPA/WPA2 networks, you need to select the correct encryption
type,as well as(AES or TKIP). These settings depend on how the
wireless network is set up . Only the owner of the wireless network
can provide the required information.
4).
see the following dialogue box
If the wireless access point is connected successfully , you’ll
1
2
3
4
5
6
7
JCG
JCG
JCG
3