User's Manual

JWA-N8002
300M WIFI Repeater
JWA-N8002
Repeater
1
Tablet
Note book
Mobile phone
2 3
297X210mm 正反面印刷
Power Supply
Modem
Telephone Line
Router
JWA-N8002
Repeater
Tablet
Note book
Mobile phone
1.Application mode introduction
1.Router+AP operating mode
The Ethernet port of JWA-N8002 works as a Wan
port,conecting it to ADSL Modem by networ cable,
Computer need to be wirelessly connected to the
JWA-N8001 Sharedaccess to the Internet.And the
IP address and DNS can be setted by autiomaticlly
get the address.TheNetwork SSID:JWA-N8002
Application environment:home,apartment,hotel.etc..
2.Repeater operating mode
The repeater operating mode is used for extending
the coverage of the existing wifi signal produced
bythe AP or Wireless router. The JWA-N8002 can
be connected wired or wirelessly to the computer.
The IP address and DNS need to be seet based
on the requirement of the former wireless router.
Application environment:Villa,multiple building,
large place.etc..
JWA-N8002
Repeater
Router
Note book
3.Router+Client operating mode.
In this mode,JWA-N8002 works as a wireless
adapter,can be used for connecting the wifi hotspot.
You just need to press the WPS button on both
JWA-N8001 and the wifi hotspot device together,
then you can quickly build a wireless connection
to the Internet.Application environment: The network
equipment which need to be connected to the internet
wirelessly,such as the network media player.IPTV,etc..
2.Building the wifi connection(We illustrate it under the Windows 7)
1.Click Start-----Control Panel-----Network and
Internet-----Network and Sharing Center-----
Change adapter settings-----Wireless Network
Connection”,Right-Click“Wireless Network
Connection”,Choose“Connect/Disconnect”.
“
2.Choosing the wifi SSID of JWA-N8002 in the
wifi SSID list,click“connect”
JWA-N8002
3.Type the network security key,click
noted that the default SSID and security key will
be printed on the label on the product
“OK” Please
JWA-N8002
4.After getting through the passward,it will be
showed“connected”,which means you are being
successfully connected.
4 5 6 7
3.1.2 Configuing the wifi SSID and Key Value. 3.2.2 Configuing the Network SSID and Key Value.
3.2.3 Click “Site Survey”to scan the wifi signal
3.3.3 Click “Site Survey”to scan the wifi signal
8 9 10
11 12 13
3.Quick Installation
3.3 Client WISP
3.3.1 Click “Client WISP”option
4. FAQ :
2.How to reset to defaults
3.Laptop can not search out the wifi signal?
1.How to use WPS button on repeater?
Long press it for 8 seconds or more to build a safe WPS connection with router,
so as to achieve wireless signal amplification by repeater (when WPS function
of router is properly enabled).
Short press it for 3 seconds to build a quick and safe connection with wireless
network card.