User's Manual

digital product to the USB port. Then it will charge the intelligent
mobile phone of iPhone and other smartphone. The charge current is 500mA.
(3)Charging the Power Bank: Connect the Micro USB tip to the Input port
of the Power Bank, then plug the USB connector into an empty USB port
on your Laptop/PC, or other USB power equipment.
Check power method
(1) Method to see the battery electric quantity: no matter what condition
I6 is in, press the display button of electric quantity (beside
the switch) and then observe the electric quantity according to the
indication status of the electric quantity lights (if four lights
are on, it shows that the battery is fully charged).
(2) Method to see the battery with a full charge: charging is done under
the condition of powering off, if the blue light is one, it indicates
charging and if the blue light is off, it shows that the battery is fully charged.
Instruction to the connection of the wireless network
The computer is connected to the operating instructions of I6 (XP)
(1) Choose “wireless network connection ”in the property option of the
“network connection” on the desktop. Following the instruction of the
picture, set the computer Internet protocol to be “Obtain an IP Address