User's Manual

Update Firmware
Confirm the electric quantity is enough, According to 1----2 , select firmware (must use
the release version of factory), then click “apply” .
Restore factory defaults
All configuration information will be lost after you restore factory defaults.
Factory default will not change the SSID that user set .
Insert an object with sharp ends into the small hole as the Overview shows “R”,
press it for more than five seconds, stop pressing when the red light is one
for an emergency and wait for the restart of the device. If the red light flashes
per one seconds, the restoration of factory defaults is successful. All the settings
will be restored to the factory defaults. Wireless connection shall be done again.