Mini 02 DASHCAM USER MANUAL
INSTALLING THE DASHCAM 1. 2. 3. Check the orientation of the Dash Cam camera first before installation. When the Dash Cam lens is facing outwards, the power button faces backward. Use an alcohol wipe to clean the windscreen and enhance adhesion. Fix the Dash Cam on the inside surface of the windscreen by removing backing off 3M tape and press & hold firmly to windscreen for 60 seconds. The area near the rear-view mirror is suggested where the vision is not blocked.
9. Once position of the camera is OK and hide the cable like method 1 and method 2 in diagram 1. Method 1: you can connect the Dash Cam to the car charger if you don’t need parking monitor mode Method 2: you can connect the Dash Cam to the car fuse box if you need parking monitor mode, so that the Dash Cam can keep monitoring or recording (selected by user) during parking. Please note that only car charger line will be included in the packing box.
2. Turn on location services in settings 3. Select go to WiFi settings 4. Turn on the Dash Cam and search for "YC_******" (the last six digits are randomly generated letters or numbers) on the "WI-FI" list of the mobile phone 5. Enter the WI-FI password: "12345678". 6. After connecting your mobile phone to the Dash Cam, just open the APP, click the "Add Camera" icon, enter the real-time monitoring screen mode. The Dash Cam connects to the WI-FI successfully. 7.
4. FORMATTING SD/TF CARD It is advisable to format the card in every three months to keep the card in good running order and to ensure you purge any locked footage that may have been saved in the past that you no longer need and is taking up space. Note: Back up files you wish to keep prior to formatting as formatting will delete all files on the SD card. SD card have a finite life. Their life is eventual wear out over time.
Do not use the Dash Cam in damp working conditions. The Dash Cam is not waterproof. Do not try opening the shell or trying to repair the Dash Cam by yourself. If the accessories for the Dash Cam have problems, please take it to an authorized repair agent for repair. Do no use a chemical substance, cleaning solvent or cleaner to clean the Dash Cam. Please use a moist cloth if you would like to clean the Dash Cam. Do not use the Dash Cam under conditions where dust is present.
Do not press the lens strongly. Do not use sharp objects such as awl scrape the host, auxiliary machines and accessories. Do not remove the memory card immediately after switch off the Dash Cam. It can avoid file damage in the TF card. Class 10 8GB or above of the TF/MicroSD card is recommended (Maximum support up to 64GB) Make sure formatting the memory card before inserting it into the Dash Cam so that the card can be read and write in stable.
Solution: This Dash Cam does not have a battery, it has a Super Capacitor. The Dash Cam will only turn on when the vehicle is switched on. Problem: The Dash Cam battery only lasts for a few seconds when power is disconnected Solution: This Dash Cam does not have a battery, it has a Super Capacitor The Super Capacitor only holds enough power to safely shut down the Dash Cam, securectly save the last file when power is disconnected and retain settings.
Solution: check if there are any finger prints or dirt on the Dash Cam lens. Clean the lens with soft dry cloth may require. 12.FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
