Installation Instructions

IT camera
This equipment is only used for legal monitoring
scenarios, please do not use illegally, otherwise
the company will not be responsible for the legal
liabilities arising.
Note: all contents are subject to those in the APP
【1】Turn on/off night vision
Click to enter the device video screen, click the light
icon under the video
Select night vision, select infrared on/infrared off
【2】 sing in
【3】Device page
When entering the APP for the first time, click "＋"
above or “Add device" below, and then select the
device to scan the QR code and pair network. A prompt
will pop up to show the device type and then select the
type to pair
Click to enter and check whether the indicator light is
flashing red, and then click to start the connection
Enter the correct Wi-Fi hotspot and password and click
Next
【2】 Turn on/off the work indicator
【3】 Turn on/off motion detection
Set/click to turn on/off motion detection
【4】 View motion detection records
You can view the detection records
【3】 After adding, select the card number and package to be purchased
on the order page, and select the payment method to pay
【4】 Click "My", find order management and click to enter to view
the details of the purchased cloud storage package and traffic card
package
【4】 Click to open the wake-up setting/find the wake-
up mode under the list, clickAfter that, three options
will pop up, click to enable the option to wake up the
alarm，At this time, the device's alarm/wakeup setting
is successful
【1】
All permissions to be reminded when downloading
the app must be turned on.
【1】 The factory is not restored, the blue light and red light
alternately flash quickly
【2】 Reset is complete, blue light and red light is off
【3】 The reset is successful, the network is to be configured,
the blue light is off, and the red light flashes slowly
【4】 The network is not configured, the blue light is off, and
the red light is always on
【2】 It is recommended to restore the factory settings
before configuring the new camera.
【1】 After the camera is powered on, press and hold the
reset button for about 8 seconds. When the indicator
light turns to blue light off and red light flashes slowly,
the device successfully restores the factory settings.
【2】 Before setting up the camera, please plug it in and turn
it on, and set it within the range of the router’s strong
Wi-Fi signal.
【3】 The memory card needs to be inserted when the
camera is turned off (the memory card format needs
to be FAT32 )
【4】 It is normal that the mobile phone cannot access the
Internet after connecting to the camera's hotspot. The
camera's hotspot is only to help connect and watch the
pictures taken by the camera at close range.
Method to restore factory settings:
On the homepage device, click the two-point more
icon to open, and click motion detection
【2】 If there is no contact in the list, click "Add contact"
to enter the "Add contact" list. Input the mobile phone
number, fill in the user name and select the permission
to share with the contact, and click share to share the
device successfully
Click to enter the device video screen, click the settings
icon in the upper right corner, and click alarm
【1】 After adding a device, click the more icon on the
right side of the device on the homepage/open and
click to share the device
【3】 After the device is successfully shared, click "
Permission management" to change the permissions
to the device. After canceling sharing, it will become a
sharing state and can be shared with other friends again
【1】 Open the APP and click "My", find service
recommendation and click "4G traffic card package"
【2】 Click "Add card number" in the top right corner of
the order page, enter card number and click "Complete
【2】 Enter the order confirmation page, select the packageto be
purchased, click "Confirm", then select the device to conduct the
purchase, and click "Pay now" to complete the payment
【1】 Open the APP and click "My", find service recommendation and
click cloud storage
Click to enter the video screen of the device, click "
More settings" in the upper right corner, find the
indicator light, and click to turn it on/off
Please use the email to log in (the permission of the
APP reminder must be allowed, otherwise you can
connect There will be problems)
Instructions
Device network
Setting/device description Sharing equipment Attention Product warranty terms
Indicator light description
Cloud storage/data card package
Page description
Automatic wake-up power
saving mode
1
8
12
13
9
10
11
4
5
2
3
6
7
1
Time display
2
Switch to night
vision mode
3
sound
4
Start/pause
5
PTZ control
(only available on certain devices)
6
Take pictures
7
Walkie-talkie mode
(only available on certain devices)
8
More settings
9
Device settings
10
Definition switching
11 Full screen mode
12
Video playback
(only available on certain devices)
13
Video recording
4
6
1
2
2
5
3
1
2
1
2
3
3
4
5
1
3
4
6
7
8
1
2
3
2
3
1
2
4
1
2
3
4
5
6
7
8
10
9
1
2
3
4
5
6
【5】 The configuration network is abnormal, the blue light
flashes quickly and the red light is always on
【6】 When configuring the network, the blue light flashes
quickly and the red light is off
【7】 The network is configured successfully, the blue light
is always on and the red light is off
【8】 During the equipment upgrade, the blue light flashes
slowly (interval 0.5 seconds) and the red light is always
on
Dear users:
During the warranty period, the company will provide free
repairs for any faults caused by the quality of the product
itself under normal use：
【1】 The warranty period of this product is one year from
the date of purchase (subject to the valid proof of
purchase)
【2】 The following situations do not belong to the scope
of free maintenance services：
【3】 If the returned product does not comply with the terms
of this warranty, if repair is required, the company will
charge the corresponding fee.；
【4】The after-sales service after the warranty period, we
will charge the corresponding maintenance cost and
replacement parts cost according to the minimum
standard each time；
Hello，thank you for choosing this product, please
read the following terms carefully before using this
product
Damaged by the user due to improper transportation
use, and management；
Disassemble the product by yourself；
The product is out of warranty；
Damage caused by accident, abuse, misuse, flood, fire
or other natural disasters or due to improper use or
unreasonable maintenance (including damage due to
external force)；
Method 1: Download from App Store
Method 2：Scan the QR code to download by mobile
browser
After scanning the QR code, select the Android or iOS
version to download and install according to the mobile
phone system
Android phone search Star Eye in app treasure
Iphone Search for Star Eye in apple App Store
【5】 Please aim the device lens at the QR code (keep 10cm
～20cm). When the blue light is on, it will be automatically
added. When the addition is successful, the device will be
displayed on the home page. Click to enter to see the video
screen.
If add failed, please reset the device and add again
according to the above process
【1】First click the device on the homepage to enter the
video screen, and then click on the device settings icon
in the upper right corner.
Note: The more the device wakes up, the power
consumption will increase
【2】After entering the device setting page, open the alarm
setting, and then click to open the motion detection in the
lower page
【3】After enabling motion detection, return to the previous
page, find the wake-up setting and click on.
【1】1、Download and install the app（APP:Star Eye）