User's Manual

ManualsBrandsShenZhen XinZhongXin Technology ManualsElectronicsBluetooth Module

F-3098 use manual

Module Description:

1 Significantly enhance the overall the latest CSR BC6 chip, sound quality and RF performance.

2 Accord Bluetooth V3.0

3 Bluetooth headsets, audio, car low cost solution.

4 High-quality audio processing A2DP V1.2.

5 The highest the 2db emission power, -91db accept sensitivity.

6 module size: L23.5*W15.5*H1.8mm.

Application:

1 High sound quality Bluetooth headset.

2 Hands free, Bluetooth Car

3 High-quality Bluetooth audio

Pin Configurations:

Item Name Type Function

1 GND2 GND Ground connections

2 AIO1 Bidirectional Programmable input/output line

3 AIO0 Bidirectional Programmable input/output line

4 PIO20/RX Bidirectional with weak

internal pull-down

UART data input, active high. PIO[20] is

clock for SPI flash interface

5 PIO23 Bidirectional with weak

internal pull-up

UART data output, active high. PIO[23]

is data output for SPI flash interface

6 PIO3 Bidirectional with Programmable input/output line PIO[3] is

Summary of content (6 pages)

PAGE 1
F-3098 use manual Module Description: 1 Significantly enhance the overall the latest CSR BC6 chip, sound quality and RF performance. 2 Accord Bluetooth V3.0 3 Bluetooth headsets, audio, car low cost solution. 4 High-quality audio processing A2DP V1.2. 5 The highest the 2db emission power, -91db accept sensitivity. 6 module size: L23.5*W15.5*H1.8mm. Application: 1 High sound quality Bluetooth headset.
PAGE 2
programmable strength internal pull-up/down chip select for SPI flash interface 7 PIO2 Bidirectional with programmable strength internal pull-up/down Programmable input/output line 8 PIO1 Bidirectional with programmable strength internal pull-up/down Programmable input/output line 9 PIO0 Bidirectional with programmable strength internal pull-up/down Programmable input/output line 10 RST Input with weak internal pull-up Reset if low.
PAGE 3
1 GND0 GND GND Restrictions: Integration limited to Battery-operated host devices.
PAGE 4
PAGE 5
FCC ID: KKI-F-3098 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 6
Important compliance information for North American users The F-3098 Module has been granted modular approval for portable applications. Integrators may use the F-3098 Module in their final products without additional FCC certification if they meet the following conditions. Otherwise, additional FCC approvals must be obtained. 1.