User's Manual

FM3963
Wii wireless classic controller manual
Function Description
Adopting 2.4G transmition mode,powered by 2pcs AAA battery.Exceptly its function
is same as the official wii nunchuk,it also has Turbo and low power indication
function
USER GUIDE
一)
Performance Guide
1. 6pcs input buttonabxyZRZL
2. 3pcs basic function keySELECTHOMESTART
3. D-pad buttonUpDownLeftRight
4. 2pcs 3D stick LXLYRXRY
5. 2pcs shoulder buttonLR
6. 2pcs shoulder trigger button:ZL,ZR
二)
Set up Turbo function
1Press down Turbo button,then press any button a/b/x/y
2During above operation,red Turbo LED will flash.After finishing setting, will
flash red when pressing a \ b \ x \ y by oneself
3Repeating above operation if cancel the Turbo function
4Pressing fixed fire button solely when playing game,there will be flashed red
LED;if no fixed button,no LED indicates
三)
How to link
1Put 2pcs AAA battery into controller,slide switch to ON position
2Blue LED start to flash when turn-on ,please press down SYNC button,blue
LED on the pads will flash rapidly,begin to search and linkAs attached
photo
3. Plug the receiver to the end of remote,blue LED at the bottom of receiver will
rapidly flash, after 1 second it will be successfully linked, receivers blue
LED will be lighting.When the Voltage is below 2.3V,blue LED will flash

Summary of content (3 pages)